1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

Wiring a Bartolini MMC to an Aguilar OBP-3- Help!

Discussion in 'Pickups & Electronics [BG]' started by weeks82, May 12, 2004.

  1. weeks82


    Oct 10, 2001

    I have an Aguilar OBP-3 in my stingray. I recently bought a Bartolini MMC to put in it. The wiring has me all sorts of confused. I don't want to do any coil switching. Thanks for any all help.

  2. David Wilson

    David Wilson Administrator Staff Member Administrator Supporting Member

    Oct 14, 2002
    Lower Westchester, NY
    The standard stingray sound is a humbucker wired in parallel, so you should wire the pickup wires as per the diagram you got with the pickup. You'll then have two ground wires and two hot wires going to the master vol or preamp input - I don't know if you have the master volume wired ahead of or after the preamp.
    Hope that helps. If you have any issues let us know what specific problems you have.