1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
     
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

Wiring a Jazz for parallel/series and two tone adjustability

Discussion in 'Pickups & Electronics [BG]' started by fatboy250, Apr 6, 2006.


  1. humb.
    http://www.seymourduncan.com/support/schematics/humb.html

    I believe this is for guitar, but I'm assuming it can be applied to bass too, right? If I'm understanding this right, with this setup one could have both series and parallel settings as well as one pup or another and tone adjustability with each pup, correct?

    Has anyone done this?

    thanks,
    Jason Rauch
    Columbia, SC
     
  2. mikezimmerman

    mikezimmerman Supporting Member

    Apr 29, 2001
    Omaha, Nebraska
    Not exactly. That diagram is for a simple Les Paul-type two pickup setup with a pickup selector switch and separate volume and tone controls for each pickup. The pickups will be in parallel with each other--no series/parallel switching.

    Mike
     
  3. you still could do it.

    just need a switcher to comlete a paralell and cut the series, and vice versa.
     
  4. Ok then, could it be wired to have all those options in one switch? parallel/series/neck only/ bridge only, with tone adjustment option for both pups still?

    Anyone done anything like this?
    Jason
     
  5. Sorry, quick side point. Could anyone recomend a good website where I can learn how to read circuit diagrams like the one above?

    Cheers
     

Share This Page