1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  

Wiring help

Discussion in 'Pickups & Electronics [BG]' started by Crott, Jun 8, 2007.


  1. Crott

    Crott

    Jun 8, 2007
    I have a BC Rich Warlock bass (bronze series).. I was playing and went to turn the volume nob when, my bass just quit. I took the back plate off and noticed a wire had broken of its soder. The wire is black and comes out of the body with a white wire, (they are stuck together side by side. The wire is only long enough to reach the volume and tone nob, (barely reaches the tone nob). I think these wires come from the pick-up. Does anyone know where this wire is supposed to be attached to?
     
  2. ehque

    ehque

    Jan 8, 2006
    Singapore
    look for tell tale signs of solder lying around.

    But really, some sort of pic would really help, and if you dont have a camera, a tech can probably fix it with minimum cost and time.
     
  3. Foamy

    Foamy

    Jun 26, 2006
    Sac Area
    Probably a ground wire - look for a piece of it, or a broken-looking solder on one of the pots where there may be other black wires soldered together.
     
  4. Touch the black wire to the back of the vol pot & see if you get a signal to the amp.
     
  5. Primary

    Primary TB Assistant

    Here are some related products that TB members are talking about. Clicking on a product will take you to TB’s partner, Primary, where you can find links to TB discussions about these products.

     
    Jan 18, 2021

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.