1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
     
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

Wiring issues on modified squire jazz

Discussion in 'Pickups & Electronics [BG]' started by petieb, Jan 14, 2012.


  1. petieb

    petieb

    Jan 14, 2012
    orlando florida
    Hi guys,

    I have a problem.
    I bought a prewired jazz bass varitone control plate from ebay for around $120 over 2 years ago.
    mine has the 3 knobs and 2 switches, one of the knobs is a 6 way switch.
    Im not sure exactly what each switch does because I lost the paperwork.

    The problem is that I fitted it and now i am getting some serious buzzing when i touch the knobs.
    the pickups are not original and the bass had no buzzing at all before the switch.

    I am tempted to go back to the way it was before but I modified a custom carbon fibre pic guard to fit this setup.

    Any ideas as to what could be wrong would be appreciated.
    Thankyou.
     

Share This Page