1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

Wiring question...

Discussion in 'Amps and Cabs [BG]' started by StandYourGround, Mar 10, 2005.

  1. So I'm going to be running BBE BMAX -> QSC RMX1450 -> Avatar B212 (4 ohms). Any suggestions and where to run cables to/from. There's enough inputs and outputs to have me wondering for a while. What would be the best way to do it, 1/4 or speakon, which inputs/outputs to use (if anyone here has experience with this setup). This is my first pre/power set up and I don't wanna mess something up. Thanks!
  2. anyone???
  3. Well i can answer one quesion. Wherever you have the chance to use speakons use them! They are more expensive but a lot better cable for high power loads.
  4. I’m with timidbassist, go for Speakons any chance you get.

    As far as the other connections, nothing to it - run a standard 1/4” cable between the BBE’s “Main Out” and one of the QSC’s inputs – whichever channel you’re using.

    Wayne A. Pflughaupt