1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

Would this work? SABDDI/M-80

Discussion in 'Effects [BG]' started by Flatwound, Mar 15, 2004.

  1. Flatwound

    Flatwound Supporting Member

    Sep 9, 2000
    San Diego
    K, now that I got some advice in another thread, here's my next Q. How about if I hook up my SABDDI in front of an M-80, so that I'm only sending one balanced signal to the board (from the SABDDI), and the Sansamp can use phantom power, and just use one at a time. In other words, if I wanted to switch sounds, I'd just click one pedal off, and the other on. I figure since the DI in the SABDDI will still be active, I can switch it off, switch on the M-80, and the signal will go thru the Sansamp to my monitor (1/4") and the board (XLR). Since both have volume controls, I should be able to get a similar output to the PA, right? Does this make sense?
  2. oddity_uk


    Feb 3, 2004
    Edinburgh, UK
    Yep that should work fine, I've considered doing this myself