I totally thought I did some, but I guess not. I appologize in advance for any bubbly noise and the extreme sound when combined with the P&C. I've tried to minimize the noise by recording thru the line in (works, but less volume "room" which is why I got the USB interface in the 1st place). As for the P&C->XXLB clip. You might like it, you might not. I just think its interesting what the warp knobs affect is on the P&Cs sound. The Warp knob is essentially "flat" at 11 oclock where the 2 arrows are. Anyways..... THE CLIPZ: XXL Bass - Drive max Warp 11oclock Tone var XXL Bass - Drive min Warp 11oclock Tone var XXL Bass - Drive noon Warp 11oclock Tone var XXL Bass - Drive min Warp var Tone max XXL Bass - Drive min Warp var Tone max wPnC "Tone var" = Tone @ min, noon, then max "Warp var" = Warp @ min, 11oclock ("flat"), 1oclock, then max The Prunes and Custard was set: Bass mode, LoFreq off, Mix and Drive @ 1oclock Enjoy EDIT: Oh ya, the bass is an SX Jazz 5 tuned ADADG strung with cromes. Both pups on full, tone off (so if you're wondering on the lack of highs, there's the explenation) I discovered, and keep discovering that I prefer my high end to come from a distortion or fuzz rather than the bass it self. Plus IMHO/E, those get pushed just a little harder in better freqs.