Psst... Ready to join TalkBass and start posting, make new friends, sell your gear, and more?  Register your free account in 30 seconds.

Yamaha Attitude output jacks

Discussion in 'Basses [BG]' started by jellybass, Oct 21, 2005.


  1. jellybass

    jellybass Guest

    Nov 8, 2004
    For those familiar with the bass, or stereo outputs in general, how are the outputs run? As in, do you run two cords to two seperate amps, are there dual cords that merge into a single cord? Thanks
     
  2. Luis Fabara

    Luis Fabara

    Aug 13, 2000
    Ecuador (South America)
    Audio Pro - Ecuador
    Both ways apply.

    You can use 2 cables...
    You can use 1 stereo cable wired with 2 Mono Plugs.
    Its all the same.
     
  3. I think the Attitude has separate outputs for the bridge and woofer pickups.
     
  4. Opas

    Opas

    Aug 1, 2004
    Harrisburg, PA
    you can also run both pickups combined through the p pickup's output jack if you activate the push/push p pickup volume knob.
     
  5. 8guy

    8guy

    Jun 19, 2005
    Madison WI
    Opas is correct, I know this from experiance, I Played Billy's bass In front of Billy Ill post about that later today in the Bassist forum if you want to know how that happened.....this is not were I should share my experiance with this Bassist.