1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

Your custom/signature amp.

Discussion in 'Amps and Cabs [BG]' started by Bigfeet, Aug 26, 2001.

  1. A little while back here on talkbass, barroso (sorry if I mispelled your name) did a thread about your signature bass it did really well. I'm sort of stealing his Idea well completly ripping it of, what would your signature/custom amp be?

    <ul>Heres what mine would feature:
    <li>750w of power at four ohms</li>
    <li>Two foot switchable chanels with controls for Gain, Drive (pull out for distortion), Lows (+/- 12dB@pull out for switches between 80Hz and 50Hz) with presence control, a bypassable sweepable mid range for just highs and lows(+/- 15dB@200Hz-900Hz), sweepable highs (+15dB/-19dB@2kHz-10kHz) and master volume control</li>
    <li>Switches for pad -15dB, mid bypass(shuts of mid control), bright (on input signal +7dB@2kHz), and ultra low (on input signal +2.5dB@50Hz, -12dB@560Hz, +2.5dB@7kHz)</li>
    <li>All tube</li>
    <li>two bypassable effects loops (one for each chanel)</li>
    <li> An extension line in for another chanel Use another preamp</li>
    <li>stereo ampable (two cabs)</li>

    I think it's cool
  2. JMX

    JMX Vorsprung durch Technik

    Sep 4, 2000
    Cologne, Germany
    A 750 W tube amp?

    You will need a flatbed truck to move it :D
  3. I didn't mean all tube just the preamp section the power would be Mosfet.
  4. notduane


    Nov 24, 2000
    Huh [​IMG]

    These guys imply that one person (or maybe
    a gorilla :p ) could lift their amp -
    Ooo...They finally got a pic of the Spectrum (click it for a bigger shot :D )

    &nbsp; [​IMG]
  5. Ty McNeely

    Ty McNeely

    Mar 27, 2000

    Yeah....right....lemme go take out a 2nd mortgage on the house and sell all the cars, previous amps, and all but one bass. THEN we'll talk:p
  6. Acepiloto


    Aug 25, 2000
    I don't know about an amp, but what I want is a 1x24 or 1x36 speaker cab. Ahhhhhh infrasonic waves.
  7. FalsehoodBass


    Jul 22, 2001
    Denver, CO
    holyjeez... that thing lists for $13,800.... that's a whole lotta cash
  8. here's mine, pretty simple

    300 watts
    all tube
    Similar schematics to a B15 portaflex
    Semi Parametric EQ (same as my A.M.P. BH-420)
    low boost, high boost
    "cut boost": boost around 800hz
    bi-ampable (100w and 300w)
    balanced+unbalanced line outs
    speaker outs (with both speakon and common jacks)
  9. jasonbraatz


    Oct 18, 2000
    Oakland, CA
    lets see...here's exactly what i need, in order of signal path:

    All tube preamp
    4 band parametric EQ
    simple tube compressor
    all tube 10w initial power stage with output/drive control (controllable via footswitch)
    XLR direct out w/output control
    two channel 1000 watt class H power supply w/biamp capability

    so, basically, an SWR interstellar overdrive with a parametric, compressor, and stewart world 1.2.

    but having that in one head would KILL. 3 rack spaces, built like a tank, speakon connectors...

    have it list for 1500 bucks too while we're at it :)

  10. barroso


    Aug 16, 2000
  11. Matthias


    May 30, 2000
    Vienna, Austria
    There is only one feature which I have not seen on any amp so far, but which would be very helpful:
    A DI output 'post FX' and 'pre EQ' (with parallel and blendable FX-loop of cause) - opposed to the options 'pre FX and EQ' or 'post FX and EQ'
    The reason is, that I us the EQ only for adapting my stage sound to room acoustics and do not want to send the EQ-ed signal to the PA.

    I hope this makes sense...

Share This Page