SOLD Ashdown MAG C115-300 EVO II

Great combo. I'm just looking for something different. I'm asking what I paid for it in August $300.

PM me for shipping...I have no idea how much this would be to ship
I still have the factory box so shipping shouldn't be an issue.

From the previous owner...
I just got this new a few weeks ago and immediately stuffed the inside with mattress topper to improve the tone and installed a 4ohm faital 15pr400 driver. Unfortunately, I had to slightly enlarge the speaker opening to fit the faital driver. This was supposed to be used for my acoustic gigs but, I found it was easier just to use the small pa so, Im going to sell this off. It was something like $500 through musicians friend ... The factory driver is back in it.

Power Output: 307W
Power Requirement: 230 / 115V
Speaker Configuration: 1 x 15" BlueLine speaker
Frequency Response: -3dB at 17Hz and 30KHz
Speaker Outputs: 2 x Jack Outputs
High Instrument Input: Impedance 3.9MOhms / Input range 150mV - 20V p-p
Low Instrument Input: Impedance 10KOhms / Input range 300mV - 40V p-p
Line Input: Impedance 22k Ohms / Input level 0dBu nominal
DI Output: 600 Ohms balanced / Level -20dBu nominal
Tuner Output: Impedance 22k Ohms, level 0dBu nominal
Impedance: 8 ohm
Output Impedance: Minimum 4 ohm
Signal to noise: Better than 80dB (EQ flat)
EQ: Bass +/-15dB @ 100Hz
Lo Mid +/-15dB @ 220Hz
Middle +/-15dB @ 660Hz
Hi Mid +/-15dB @ 1.6kHz
Treble +/-15dB @ 7kHz shelving
Deep +8dB @ 50Hz
Bright +10dB @ 10kHz
Effects Send: Impedance 22k Ohms, level 0dBu nominal
Effects Return: Impedance 22k Ohms / Level 0dBu nominal
Distortion: Less than 0.5% THD
Dimensions (W x H x D): 18.7" x 22.9" x 11.8"
Weight: 61.7 lb.

FYI:
This guy is clean. No nicks, tears for funky smells.

 

Yeah I thought about just using the Amp with my 15" Cabinet LDS/Faital Pro. It sounded sooo good.

 

I'm willing to split the shipping if someone is interested....

I just checked it is about $55 to ship from Cincinnati to New York. So if your interested in shipping than that give you an idea of what it would cost.

 

Bump

 

If your local I have a 4x10 that I could work a great deal on as well.

 

TTT

 

Here is a pic of how much was remove. Not much at all but I wanted to mention it

 

Bump

 

TTT

 

Bump

 

TTT

 

Thanks! I really like it and keep thinking about keeping it but then I already have enough gear for my basement.

 

Sold!