• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

the shop accedents thread (WARNING: high possibility of bloody images)

well, i as well as most, probably walk out of the shop with a few light scratches here and there, but this thread is for the less common ones, the ones that take a while to heal, or things that could be considered injury.
i just had one myself. i borrowed some shaping/carving hand tools from the school. carving went well, until i decided to make one part concave, which requiered me to dig in a bit. the hand tool slipped and went far (maybe 3/4 of the way) into the palm of my hand. i looked at it for a while to see how much it would bleed. once i help about a tablespoon of blood in my hand, i decided to clean it up. this was the first time in years that there was a gel like quality to my blood. this was the first time that when i stretched my palm out, MUSCLES POPPED OUT a little (muscles, not dead skin). i though it was cool and was actually laughing. of corse, now i am going to keep my hand in a relaxed semi cup shape, to avoid it damaging and bleeding further. don't want to screw up my fretting hand. this isn't the first time i have cut my hand this deep. a few years ago, i got pushed out of a 3rd floor window, i broke the glass, and grabbed the frame to prevent myself from falling, and there was a good amount of glass on the frame:eek:)
other than that, ladst friday, i fell from the top of the ladder in shp class, and landed on head/upper shoulder. am fine though (exept for skinned up hands from trying to grab the steps to stop falling), my head is abnormally hard, and i have a very high pain tolerance.
will get pics of the head up. whats your story
 
I had one not too long ago,

I was slotting the g on the nut on (the last one to slot) I was using a drill and laying the bit onto the nut (sideways), i was using a 1/16" bit, the bit snapped and flipped in between my eye and my upper eyelid, once I jumped back, I realized I had about 3/4" of a bit in my eye. I had to open my eye real wide and slide the bit out from between my eye and eyelid, long story short, I scratched my cornea and my inner eyelid pretty good. Fortunately It was nothing permanent, which makes me realize, i was a dumbass for not wearing safety glasses (plus I need to just get a nut file set). After 2 days, it was alot better, It was very blurry and sore. I just figured I'd share one of my stupid, dumbass mistakes.
 
I had a belt sander like this one...

http://www.blackanddecker.com/ProductGuide/Product-Details.aspx?ProductID=18864

Somehow, when doing late night sanding (with 60 grit....), the sander kinda bite into the wood, then decided to leave my hand, then, my other hand decided to try to grab the sander while it was flying and it got stuck between the paper and the curved part on the back (where the big roller wheel is...

Now I know how much skin a 60 grit sandpaper can take of a hand.... it hurts... did I say it hurts....
 
i looked at it for a while to see how much it would bleed. once i help about a tablespoon of blood in my hand, i decided to clean it up. this was the first time in years that there was a gel like quality to my blood. this was the first time that when i stretched my palm out, MUSCLES POPPED OUT a little (muscles, not dead skin).

You could help the guys at the blood finish thread :p
 
For the moment, I'd like to keep this thread going (and probably link it to the safety part of the FAQ's). However, I'd much prefer that the bloody images DO NOT show up. I know, I know...now that the boo-ing has died down, keep in mind that this probably wouldn't fly in any other forum here so we've got to be held to a similar standard. Perhaps if he's willing, Jordan will email you the pics if you request rather than posting them here.
 
One time I was in my basement soldering my pickups in then a vietcong jumped through my window and cut off my arm with a machete. I picked up my arm and slapped him all the way back to Nam. Then I went and soldered my arm back on and I'm all good now. But it sucked, not gonna lie.