Recent content by Bret Teegarden

You might try making a 2 conductor shielded cable with a female XLR on one end with pins1/3 tied and a TS with with the hot (pin 2) connected to tip and the neg. (pin 3) connected to the shield but do not connect the shield at the 1/4" TS and take your output from the Fatboy Mic Level output to...

That's OK Ukiah, all it takes for a spec sheet is a pen & paper. What would you like me to fix?

For more clarification, the old "Wobble" jack was just a buffered unbalanced output before the output transformer. The final shipping unit has separate Line and Mic Level Balanced outputs on the rear and the Thru is now what the "Wobble" used to be. Normally this is set to instrument level but...

Very true Justin Oscar, but a lot of studio guys are taking their Fatboy to "live" gigs so they can leave their $7000 signal chain at home. Gary Lunn calls it his $7000 sound in a $700 box. That's good enough for me.

cybersnyder, I hope that wasn't mis-leading, given the talk about bass preamps in this thread. The Fatboy was not designed as a preamp for an amplifier, although it can serve that purpose. The preamp referred to on our website is a tube microphone preamp that utilizes much of the same topology...

Hello friends, First, Thank you Michael Arnopol for your kind words about the Fatboy Tube DI. Second, please forgive the out of date information on our website. We have been a little busy and updates are in the works. A lot has changed about the Fatboy over the last year or so as we have been...