Recent content by fullmetalmaster

Hey everyone! Tomorrow I'm about to record singers and an acoustic guitar players with my Behringer Eurorack UBB1002 mixer. I'm sending the signals to record on my Tascam DR-70D digital recorder. My mixer has an RCA tape out, and a L/R 1/4" main output jacks. Which outputs do you recommend I...

Sartori, I already got a 1x15" (8 ohm) cabinet to match with my other cabinet, I love the low end it gives. But thanks for your suggestion. It's in the picture I posted just recently above. It's below the 4x10" cab.

I figured out the problem. This time I put all my pedals in the effects loop and turned my EQ on the amp all the way down. Then I used my EQ on my bass DI+ for tone ONLY. It looks like before, I was definitely cranking the frequencies too high when combining both Equalizers. Now I am not...

Ended up buying a KK Audio 1x 15" (8 ohm) bass cabinet with an Genuine Eminence speaker inside it. It sounds great now that I have a lot more low end. That 1x15" cabinet is on the bottom.

Alright. Thank you for your feedback. I almost bought a used 2x10" 4 ohms cab to pair with my 8 ohms cab which would have fried my amp. I'll consider using 2x 8 ohm cabinets instead.

Interesting enough though I'm having this problem with my 4 string bass, tuned Standard EADG.

Hmmm... well considering I have one 8 ohms 4x10 already, would an additional 8 ohm 2x10" or 4x10" sound better or louder?

Ok. Even though it would run into its excursion limit, would it be better if I could have two 8 ohm cabinets together with my GK amp head?

OK thank you for that information seam and B-string. Im new learner about amplifiers and cabinets. For sum odd reason thoughwhen I cranked the volume on my 280w GK amp head to maximum, my 200w (8 ohms) Harkte cab it made a nasty farting sound. Why could that be?

Hello everyone, I have a 280 watts (4 ohms) Gallien-Krueger 400RB-IV bass head paired with a 200watt (8 ohms) Hartke Transporter bass cabinet. I bought this bass cabinet at a local music shop and they told me that it could handle my GK's power. Little did I know that after buying the cabinet...