Recent content by Jeff Genzler

That plan would work out just great. If you got the Kinetix, you could have a dual preamp bass head. Thanks for considering.

I've not experienced this with any of our cabs but my thoughts would be that the floor may have been somewhat hallow allowing for more vibrations, through the bottom of the cab. As for any head vibrations on top of the cab, we do add bracing thr bisects the top panel designed to guard against...

Thank you @BassAdder27 ---- So glad to hear your initial impressions. It is a very different amp than the Magellan design. Some players are finding that there is a place for both in their gear requirements. I'm sure it is very impressive on your new MG-ULV-212T cab. Stand back!!

I'm also going to let others comment but I think HowieD72 has already said that the Kinetix 800 is so much more than what the Streamliner is. Similar only in their preamp basic topology with 3 preamp tubes running at high voltage. As we designed the Streamliner, we already knew what we...

@Super4 ---Thank you for this report and the kind comments. We always appreciate hearing players feedback. So glad this rig is surpassing your expectations. We do appreciate that you rely on our gear.

Yes, this was done by design, to offer additional EQ points when using the Re/Q with our Magellan amps. Using slight EQ adjustments on the amp and more precise adjustments on the pedal. Plus using the pedal as a boost function with EQ to taste added with the boost. Just added versatility.

I can answer this ----- Left-right 8", center to center; front-back 7.75", center to center. Hope this helps.

Good morning ---- Thanks for the question. Yes, in the DI PRE mode, the signal to the DI is coming right off the first preamp tube input stage (running at 300V) so you are always getting a tube buffered DI signal to the house, even in the DI PRE mode. In the POST mode the entire preamp...

Yes, I confirm that the info above is correct. Niether Contour is in the signal chain in the CCW (off) position. They make no impact in the tone in that position. These are very musical filters and players have found them to be very useful, and rarely do I hear that players go to the...

If you're concerned about a harsh top end, the Bass Array design is the opposite of that. It's our opinion and that of many users, that the upper mid and top end of these Bass Array cabs, are very smooth, without that tale-tell tweeter harness, as there are not tweeters in the line array...

Yes, the Bass Array design does allow for a much smoother upper mid and top end. As for adding a cab to the BA2-212-3 cab, I would gravitate to the BA2-115-3SLT. I think two double driver cabs of differing speaker size (for me) would not blend as well. But that's just me.

Thanks for the comments. I sent you a PM on the cab availability. Regarding your question of the BA2-115-3SLT under this cab, when Nate did his demo video of the BA2-212-3 he did pair it with the BA2-115-3SLT. His impression was that it did add a little more beef under the 2X12" BUT the...

Awesome!! Kinetix 800 with the MG-12T-V cab. Cool song and video. Nice to see this. Thanks for sharing.

We are using LaVoce speakers now. The MG-ULV cabs use the same speakers we use in all of the BASS ARRAY series 2 cabs. We find they have better performance, same power handling and nicer low frequency extension and mid character response -- and they are lighter.

Thanks for the intitial comments. They are sincerely appreciated. And I've noted the update to your signature pic here as well. Nice!!! Yes, our design parameters between amps and cabs are very similar and meant to let your instrument and personal tone signature come through as uncolored as...