Enjoy the benefits of a premium membership!
Upgrade Account
sissy kathy's latest activity
-
sissy kathy reacted to La Faro's post in the thread And another quandary….no place to turn on Allen screws for action? with
Like.
I like how you opted to post a picture of your finger injury over the part issue you are trying to resolve. -
sissy kathy replied to the thread And another quandary….no place to turn on Allen screws for action?.The injury is time sensative as it will heal. That d**n screw will still be there next week.
-
sissy kathy replied to the thread And another quandary….no place to turn on Allen screws for action?.Get a wide rubber band (elastic) and stick it between the screw driver and the screw. If that doesn't work drill the screw head with a...
-
sissy kathy reacted to 96tbird's post in the thread A and G string popping out of nut on aluminum neck? with Like.
Agree, wind to the bottom of the post. You have zero break angle on ALL of your strings. ALL OF THEM. For now, you could try loosing...
-
sissy kathy replied to the thread Could anyone make an 11’’ radius gauge?.I agree the radius is the same, but they are not parallel, so set your action at the 1st and 4th strings; then make the others match the...
-
sissy kathy replied to the thread Weird idea: Pedal Actuated Foam Mute.Here is what I believe is the first of several threads. The mute is called "The Bass Mute". Aw heck, I had the thread and lost it by not...
-
sissy kathy replied to the thread Patton Mute Pad?.Welp; THAT didn't work.
-
sissy kathy replied to the thread Weird idea: Pedal Actuated Foam Mute.I'm searching now, but I have no Idea when after 2014 the thread was. So I'm looking at all of'm; it's gonna take awhile.
-
sissy kathy replied to the thread Weird idea: Pedal Actuated Foam Mute.Instead of a motor, use a solenoid, like a car door lock, and a momentary toggle right on the bass.
-
sissy kathy replied to the thread Weird idea: Pedal Actuated Foam Mute.Yes, one was developed in Denmark(?) I believe. the inventor had a hard time getting it off the ground. A few were produced and then the...
-
sissy kathy replied to the thread Ferrules for Warmoth string-thru.That must be the length of the grommet. If it's the width, that is 3/4"; a string ball will slip right through. Find the diameter you...
-
Pickups don't have the stress of the tension of the strings.
-
sissy kathy replied to the thread Thinnest 6 string bass bridge.Anything that works for fiberglass will work for carbon fiber. Carbide or tungsten bits will work fine, SHARP HSS should work. I'm not...
-
sissy kathy replied to the thread Thinnest 6 string bass bridge.The area has already been routed to fit the pickups. I seriously doubt the inside hollow is shaped to allow for that.
-
sissy kathy replied to the thread Thinnest 6 string bass bridge.You can question my knowledge of it without my comparison.