Recent content by skaplan279

Barrel style having set screws Also need 50mm intonation screw and spring but the screw has to be fillister head and the spring has to have 12 turns not including the ends

I removed the fretboard and that revealed a skunk strip covering the truss rod What kind of glue is holding it on, hyde or titebond? If it's titebond then I can free it with heat, acetone or otherwise If it's hyde it should be water soluble All the videos I see on youtube when the truss rod is...

Barrel type having set screws

They stopped responding in an email exchange where I was trying to find out who bought it, I wanted to know whose guitar it had been

Want to buy one 9.5x20mm barrel style string saddle

They're larger than Fenders at 9.5x20mm vs 8x19mm At least that's what I bought on ebay, they measure 8x19mm

9x20mm barrel not including the set screws and the intonation screws are 50mm long (not including the slotted fillister head which accounts for an additional 2.5mm)

I'm trying to identify this bridge and replace a missing string saddle on a 1987 PRS Bass IV so my questions are where can I find the saddle and if I were to remove the bridge would I find the manufacturers name on the reverse side, I'm thinking not because any mark would leave an imprint

I need an oversize string saddle where the barrel is 9.5x20mm and the intonation screw is 50mm long for a 1987 PRS Bass IV