Recent content by somabass

No i trade it for a Hohner B2 that i was not using anymore.

Hi Jio, i tried the 4mm but its a little loose and 4.5mm too large. Will keep trying. Here are the pics!

Hello i just got a sunburst Bass IV in VGC but the neck needs a little relief. Do you guys know whats the allen key size for the truss rod? Thanks!

Thanks sheltjo6 will try that.

Hi, Here are a couple of pictures. Everything as in the Aguilar diagram except i added the shielding of the poles at the bottom of the pickups and connected to ground in the volume pot. I have tried with and without this shielding and its the same.

40Hz i have tried with and without the shield on the pickups pole and the same problem. The only thing thats left for me to try is changing the pots ( although these are new ) and see what happens. I have tried with Aguilar tech support and they say it can not be the pickups.....so. Thanks a...

Hi thanks for answering. I’m not sure what you mean by “grounded the back of the Aguilar pickups.” The only thing that needs to be grounded on an AG-4P-60 is the black wire. The white wire is the hot lead. I meant the back of the pickup poles, i shielded and connected to ground that copper...

I have found that the problem disapears when i touch the cable plug or the bridge.

Hello this is my first post here, hope someone can help me. I have changed the Fender pickups of my fretless bass to Aguilar AG 4P-60s. The thing is that with the original pickups the bass was silent but with the Aguilar i have this noise when i turn either the volume pot or the tone pot, (i...