Recent content by ZackLow

Haha. Sorry about that. I missed a number. Thanks for the help. Seeing how the 15mm spacing may have been difficult to find, I'm guessing making something is going to be my best bet.

By my calculations the string spacing will need to be approximately .4625" center to center. Current spacing is approximately .578125" center to center.

So, I'm going 5 string on a 4 string neck (1.75" nut). Am I going to need to build/ frankenstein a bridge or are there any bridges out there with a narrower string spacing that will work? I'm at work right now, so I dont have a chance to measure my current bridge or string spacing or the...

My ABM 410 has the logo riveted on there. Looks pretty difficult to remove. I've wanted to take it off for a while.

Thanks!

Hopefully it holds up. It's mounted around a metal grill and duct taped to hell. All in all, I'm pretty proud of how it turned out. There wasn't a lot of space to make a frame and replace the actual grill. Any suggestions on how I could improve the mounting process are welcome. Not sure if...

Received and loving it!

Pm'd

This one is two months old.

Completely necessary. I do a lot of textural stuff, noisy feedback and loops. After what you've said I think it may be my loop station and I have one I can borrow.

Not anything that I can think of that would do that. My board: TU2> Black Cat Bass Octave Fuzz> MXR ZW OD> EHX Holy Stain> Boss RC 20 Loop> head. I use a sansamp live so if my head cuts out it wont be a huge deal. I will bring it and see if any one is willing to let me use their head at...

Active, batteries were changed last week.

I use a 1spot. My RC 20 was a little loose where supply input is.

I play an Ashdown ABM 500 EVO II. So, last night at practice my volume was dropping off. This was happening a couple weeks ago and I thought maybe one of my cables was shorting out, so I replaced all of them. Then I thought my spekon was going out, so I replaced it. Well, last night...