The time has finally come. I’ve decided to part ways with my 1965 Ampeg B15N. It has served me well and now I’m looking to find it a good home. Originally picked it up in summer ‘19 non working with a blown PT. Replaced the bad PT with a replacement from Mojotone serviced the amp my self with guidance from my boss who’s built and restored amps for the past 30 years. Been running like a top ever since with no issues at all! Also had the orignal CTS 15” speaker reconed by Bill LeGall at Millersound since the cone was in pretty rough shape with some previous patch repairs, sounds great! Cab is pretty original and has the original Dolly as well, altho the amp and cab were modified to use a 3-Pin XLR input Jack (this was done before I purchased the amp, works fine with no issues). It also has vintage octal preamp tubes and rectifier that came with the amp when I got it. Power tubes are newer 6L6’s that matched and biased great last time the amp was serviced. Original Plexi plate was cracked in half and glued back together by the previous owner, and I currently have a new one with my first name engraved on it made by a friend. More pics available upon request since Facebook only allows 10 for a listing.
Located just 40 minutes North of Philly in Huntingdon Valley, PA. Local pickup preferred but willing to meet halfway within the tristate area. Looking to get $2000 OBO, I also have 2 Custom built cabs that I had made so I could take the amp out and not beat on the vintage cabinet. Top cab is a flip top with 4 thumb screws and has the holes to mount the B15N head to it (Loaded with an Eminence Delta15A), bottom is an extension cabinet to run both 15’s at the same time for a 2x15 B15N rig (loaded with an Eminence Kappalite 3015 Neo). Will include them in for an additional $700. will do Both the B15N and Custom cabs as a package deal for $2500.
Thanks for looking!
