- Fretless
- Y
2004 Spector Rebop 5 string fretless made in the Czech Republic.
Rosewood fingerboard
Alder body
35" scale
High mass replacement Spector Euro bridge eliminates neck dive compared to stock bridge
2 brand new EMG P5 active pickups, literally dated 5/10/2024 when they were made
EMG BTS system
New output jack & battery clip
Graphite nut (I think)
Stock tuners
Schaller strap locks and buttons
Spector OHSC and leather strap
8 lb 9 oz
Fingerboard is in pretty good condition but could maybe use a light leveling around the 3-7 positions
Truss rod functions perfectly
I don't see any major dents or scratches aside from some marks on the headstock face
There are two different sized screws that bolt the neck to the body and at one point one of the longer screws was put in the shorter hole. You can see where the point was about to come out on the front of the neck heel but didn't. Purely cosmetic but I noticed and should mention it.
The battery connectors that are wired to the blend control come loose on occasion, they were reused from some other EMGs. There are 2 brand new sets of EMG connectors/parts that came with the pickups that will be included.
The hole where the blend knob is has been widened slightly for a 3 way toggle switch in the past. No effect on stability
ALL original parts that I have will be included with sale as well as some replacement parts stolen from another Rebop 5 I used to have. Probably enough to warrant its own sale but I have no use for any of it anymore.
Free shipping anywhere in the US or Canada
Please message me with questions and thank you for looking
Rosewood fingerboard
Alder body
35" scale
High mass replacement Spector Euro bridge eliminates neck dive compared to stock bridge
2 brand new EMG P5 active pickups, literally dated 5/10/2024 when they were made
EMG BTS system
New output jack & battery clip
Graphite nut (I think)
Stock tuners
Schaller strap locks and buttons
Spector OHSC and leather strap
8 lb 9 oz
Fingerboard is in pretty good condition but could maybe use a light leveling around the 3-7 positions
Truss rod functions perfectly
I don't see any major dents or scratches aside from some marks on the headstock face
There are two different sized screws that bolt the neck to the body and at one point one of the longer screws was put in the shorter hole. You can see where the point was about to come out on the front of the neck heel but didn't. Purely cosmetic but I noticed and should mention it.
The battery connectors that are wired to the blend control come loose on occasion, they were reused from some other EMGs. There are 2 brand new sets of EMG connectors/parts that came with the pickups that will be included.
The hole where the blend knob is has been widened slightly for a 3 way toggle switch in the past. No effect on stability
ALL original parts that I have will be included with sale as well as some replacement parts stolen from another Rebop 5 I used to have. Probably enough to warrant its own sale but I have no use for any of it anymore.
Free shipping anywhere in the US or Canada
Please message me with questions and thank you for looking
