SVP1.jpg

For sale Ampeg SVP Pro - Tube preamp - Price Drop

Sold
$375.00
Status
This item has been sold and is no longer available!
Status
4 members are watching this classified ad

Details

Sounds great. Fully functional. A bit of rack rash around the ears but overall pretty clean.
3 tubes were replaced in 2018 (lost the invoice so I have no details).
2 new tubes added in 2022.
Tung-Sol 12AX7 / ECC803-S Gold
EH-12AU7A / ECC82EH - sitting in the V5 slot.
Putting a 12AU7 in the V5 slot makes it quite a bit quieter. The trade off is that there is less output. I dealt with that by putting a BOSS GEB-7 pedal in the effects loop.
I had also used a TC Electronics Spark Boost pedal.

Priced to move.
$340 Shipped to the ConUS.

SVP4.jpg
  • SVP1.jpg
    SVP1.jpg
    469.5 KB · Views: 84
  • SVP2_A.jpg
    SVP2_A.jpg
    115.2 KB · Views: 27
  • SVP2_B.jpg
    SVP2_B.jpg
    495.8 KB · Views: 25
  • SVP3.jpg
    SVP3.jpg
    144.4 KB · Views: 34

Comments

Jim C

I believe in the trilogy; Fender, Stingray, + G&L
Supporting Member
Nov 29, 2008
15,870
14,111
Bethesda, MD
With stock tubes, is the pre-amp noisy just with overdrive or even when clean.
Understood that this has been a common problem with these.
Ironic that the SVP-CL and SVT IIP are really quiet.
 

GtenderG

Supporting Member
Feb 29, 2008
3,329
2,638
I've received several inquiries regarding the functionality and the sound of the preamp. Specifically regarding the 'noisy' comments I made in the original post and in a reply I made. Also, it's overall funtionality.
The preamp is fully functional and it sounds great. It was part of my rig for quite a while. Most recently it’s been used for bass pedals in the prog band I play with. I plug it into a Crown xls 1002 power amp and it's been great for live shows. The DI sounds sounds great as well.
It’s not noisy. With the stock tube there was a bit of ‘tube amp’ hum. A known issue with the SVP Pro. By swapping the V5 tube the hum along with the overall output (Preamp out) level is reduced.
My little trick of putting the EQ pedal in the effects loop allows me to drive the power amp a little harder. Also, when I use the EQ pedal I actually engage the -15db pad on the preamp itself.
Without the EQ pedal in the loop and the -15bd switched off its about the same volume. I like the EQ pedal because you can tweek the EQ based on the sound in the room.
 
May 28, 2013
220
514
I have one of these that's a little noisy. I narrowed it down to coming from V5 (Master Volume Tube). Another solution for any hum is to get a XLR to 1/4 in cable and use the DI out as your main output to power amp. The DI is transformer isolated, bypasses V5, and the DI out level knob becomes your master volume. This is how I have mine setup and it's dead quiet. The only inconvenience is the volume is on the back. Or you can put a volume pedal/knob in the loop.

Overall it's an awesome preamp. GLWS
 
Last edited:

GtenderG

Supporting Member
Feb 29, 2008
3,329
2,638
Reduced price to $340 shipped to the ConUS.
I won’t be heartbroken if it doesn’t sell. It’ll get used with my ‘outdoor’ rig later this summer.
IMG_0544.jpeg
 

2saddleslab

Supporting Member
May 30, 2003
9,423
36,186
Kentucky
Played an SVP Pro for years during my rack mount days. I heard all the "noise" stories back then but it never seemed to be an issue at gigs. Just great Ampeg tone, GLWTS!
 

Classified ad information

Posted by
GtenderG
Feedback score
+34 /0 /-0
Category
For Sale: Amps, Preamps, and Cabinets
Views
1,012
Watchers
4

More from GtenderG