1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  

SOLD EWS Trilogic III Bass preamp

Discussion in 'For Sale: Effects and Pedals' started by Mikeee71, May 3, 2019.

  1. Mikeee71

    Mikeee71 Supporting Member

    Sep 6, 2013
    This pedal is super transparent and excellent condition! 99$ Shipped conus!

    Tri-logic Bass Preamp 3
    Third generation Tri-Logic3 keeps the same neutral characteristic as the Tri-Logic1 and 2, minimizing the coloring of tone, but also has an abundant of added features and flexibility to correspond with any bass guitar. Gain control has an option between clean boost mode (Normal), with a maximum of +18db, or high gain mode (Hi Gain) with compression at +26db. The Treble control provides ±15db and can be switched between 4KHz (low) or 8KHz (high) with toggle switch. The Mid control knob provides ±10db and allows for sweeping between 250Hz to 3KHz. The Bass control provides ±15db, switchable between 40Hz (low) and 80Hz (high), and allows you to obtain accurate and flexible sound in any playing environment.
    MSRP: $210
    • Operating voltage option is 9VDC or 18VDC. Compared to 9VDC, 18VDC has less distortion with wider range of tone, but please be aware at 18VDC battery will drain faster.
      Factory Setting is 18VDC.
    • Either 9VDC battery or 9VDC power adapter can be used.
      *Please only use the regulated negative tip 9VDC power adapter.
      *Please do not use other adapter except for a 9VDC negative tip power source to limit possibility of failure.
    • Relatively loud popping noise may occur when you use the foot switch for ON/OFF or change the mode using each mode switch shortly after turning the power on, or shortly after switching between 9VDC and 18VDC. This is not a device failure. Repeating the ON/OFF with foot switch to stabilize the operating voltage can reduce the popping noise.
    • Please make sure that the effect is turned off when using the Dip Switch located inside the pedal to switch between 9VDC and 18VDC to protect the pedal’s internal electrical parts, bass guitar and other effect pedals you are connected to from excessive load.
    True Bypass Switching
    Power Consumption
    9VDC / 3.3mA, 18VDC / 6.6mA.
    Battery Type
    AC Adapter
    9VDC, Negative Center Tip (Regulated Recommended)

    Attached Files:

    Last edited: May 16, 2019
  2. superheavyfunk

    superheavyfunk 音楽は人生だ

    Mar 11, 2013
    I've always wanted to try this preamp. Unfortunately it's not in the cards for me atm. :(

    Mikeee71 likes this.
  3. notejung

    notejung Supporting Member

    PM's sent
  4. Primary

    Primary TB Assistant

    Here are some related products that TB members are talking about. Clicking on a product will take you to TB’s partner, Primary, where you can find links to TB discussions about these products.

    Feb 27, 2021

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.