Bag End S15X-D in Excellent cond. Portable, Punchy, Great cab and can get loud. These cabs are Legendary, built like a tank with a small footprint. I upgraded the connection plate to a new Bag End Speakon combo plug from BE $80, takes Speakon or 1/4 plug. This model has the coax dome tweeter, smooth highs. Buyer pays Shipping to the lower 48.
Here are the specs.
System Type: Rear vented 1.5 ft3 Enclosure: 3/4” 13-ply solid hardwood core plywood Finish: Deep Red Carpet Grille: 16 Gauge black power coated perforated steel Low Frequency Components: Transducers, 15” cone, 2.5” Voice coil, 80 oz. Magnet Mid Frequency Components: Transducers, 4 - 10” cones, 1 - Compression driver High Frequency Components: Transducer, 1 – E-550 2” Titanium diaphragm, Compression driver Input Connector: Neutrik® speakON 1/4” combo jack Hardware: 2 - Handles 8 - Protective corners Crossover Type: Passive filter type @ 3.7 kHz Sensitivity: 103 dB SPL (2.83 V @ 1m) Frequency Response: 46 Hz to 16 kHz ±6 dB Power Handling: 300 W continuous (IEC) 600 W program Recommended Amplifier Power: 300 to 600 W at rated impedance Rated Impedance: 8 Ohms Polarity: A positive asymmetrical signal applied to the + terminal will result in a positive asymmetrical acoustical pressure Dimensions: 18.5”h x 18.5”w x 15.5”d 47 cm x 47 cm x 40 cm Weight: 50 lbs 23 kg
Here are the specs.
System Type: Rear vented 1.5 ft3 Enclosure: 3/4” 13-ply solid hardwood core plywood Finish: Deep Red Carpet Grille: 16 Gauge black power coated perforated steel Low Frequency Components: Transducers, 15” cone, 2.5” Voice coil, 80 oz. Magnet Mid Frequency Components: Transducers, 4 - 10” cones, 1 - Compression driver High Frequency Components: Transducer, 1 – E-550 2” Titanium diaphragm, Compression driver Input Connector: Neutrik® speakON 1/4” combo jack Hardware: 2 - Handles 8 - Protective corners Crossover Type: Passive filter type @ 3.7 kHz Sensitivity: 103 dB SPL (2.83 V @ 1m) Frequency Response: 46 Hz to 16 kHz ±6 dB Power Handling: 300 W continuous (IEC) 600 W program Recommended Amplifier Power: 300 to 600 W at rated impedance Rated Impedance: 8 Ohms Polarity: A positive asymmetrical signal applied to the + terminal will result in a positive asymmetrical acoustical pressure Dimensions: 18.5”h x 18.5”w x 15.5”d 47 cm x 47 cm x 40 cm Weight: 50 lbs 23 kg
