Up for grabs: Double NFP-Special preamps by Lustihand Devices. These preamps are designed specifically for Multicoil pickups that benefit from a one humbucker per string type of connection. I used them for 9 months or so, and upgraded to the newer version of the NFP-Special Pre's (the new ones have a push pull Boost circuit and reverse log potentiometers on the filter knob). The set for sale has a push on, push off toggle for the Boost circuit.
Included are two filter boards, the blend board, and a volume know. All work perfectly!
Note: These require multicoil pickups wired as one humbucker per string (Referred to as NEW WAY wiring by rautia guitars).
$225 shipped, obo.
PM with any questions!
From Lustihand:
The NFP-Special preamp is an evolution of the NFP but designed specifically for Multicoil
pickups that benefit from a one humbucker per string type of connection. The idea was to get an Humbucker pickup with one pair of coils per string(horizontally) and combine them electronically for maximum pickup performance and string isolation. This method of mixing the coils brings maximum output, clarity and punch of the pickups without any adverse loading effects. The pickup then goes through the tonal enhancer part of the circuit where the filter preamp works its magic.
The potentiometer has a sweepable frequency that ranges from 150hz to 4.5 khz. You can also Boost the center frequency by pushing down on the potentiometer.
The preamp runs between 9/18 volts and it has a current draw of +- 10.5 mA. It offers 6x inputs so that you can wire any pickup up to 6 strings.
Included are two filter boards, the blend board, and a volume know. All work perfectly!
Note: These require multicoil pickups wired as one humbucker per string (Referred to as NEW WAY wiring by rautia guitars).
$225 shipped, obo.
PM with any questions!
From Lustihand:
The NFP-Special preamp is an evolution of the NFP but designed specifically for Multicoil
pickups that benefit from a one humbucker per string type of connection. The idea was to get an Humbucker pickup with one pair of coils per string(horizontally) and combine them electronically for maximum pickup performance and string isolation. This method of mixing the coils brings maximum output, clarity and punch of the pickups without any adverse loading effects. The pickup then goes through the tonal enhancer part of the circuit where the filter preamp works its magic.
The potentiometer has a sweepable frequency that ranges from 150hz to 4.5 khz. You can also Boost the center frequency by pushing down on the potentiometer.
The preamp runs between 9/18 volts and it has a current draw of +- 10.5 mA. It offers 6x inputs so that you can wire any pickup up to 6 strings.
