This amp is brand new. I’ve had it for about 2 months and it has never moved or left my home studio. Bought it from Sweetwater. Never gigged, just used a little for home practice.
Price: $900, PayPal
Can be picked up within a reasonable distance of Orange, TX, or will happily ship at buyer’s expense, just message me for a quote.
For sale only, no trades.
It sounds fantastic, and is extremely versatile with the two channels. It’s just really way more amp than I need though and I could use the money for other gear at the moment. All my gigs are using IEMs and this for me is just way too much horsepower for a practice amp.
There are absolutely no functional or cosmetic issues with the amp. When I took it outside today to take the pictures, I noticed there is a tear in the bag (pictured). I’ll reach out to my Sweetwater rep or Mesa, and see if I can get a replacement.
Comes with gig bag, power cord, and all goodies. Footswitch isn’t included as that is an extra purchase item and I never bought one.
Specs from Mesa:
- Foot-switchable, 2-channel, Class A vacuum tube preamplifier with Tri-Tube topology, 3 x 12AT7 tubes
- Class D power section with 8, 4, or 2 ohm Impedance Switch
- 800W @ 4 or 2 ohms; 400W @ 8 ohms
- Channel One (Boogie Channel) with Input Gain, variable Highpass filter (25Hz–125Hz), passive 3-band EQ with Bass, Mid with variable Mid-Shift control, Treble, and Master Volume
- Channel Two (Subway Channel) with Input Gain, variable Highpass filter (25Hz–125Hz), fully active 3-band EQ (±12dB Bass, Mid, Treble) with sweepable Midrange frequency control (150Hz–2kHz), and Master Volume
- Play/Mute switch; High/Low Gain switch: Deep switch; Bright switch
- Channel/Footswitch select switch
Global O/D Symmetry control (variable, symmetrical to asymmetrical)
Protection and Limiting LED indicators
- Tube-driven, post master, balanced XLR DI Output with Line/Mic and Ground Lift switches
- Tube-driven, pre-EQ, balanced XLR DI Output with Line/Mic and Ground Lift switches
- 2 channel-Independent, fully buffered series FX Loops
- Rear-panel Tuner Output with front-panel Play/Mute switch
- External Footswitch jack for Tuner/Mute and Channel Select (footswitch available separately)
- Headphone Output; Auxiliary Input; USB Power Outlet
- 2 Speakon Speaker Output jacks
- Rugged, lightweight (7 pounds, 3 ounces) fan-cooled chassis
- Handcrafted in Petaluma, California
Price: $900, PayPal
Can be picked up within a reasonable distance of Orange, TX, or will happily ship at buyer’s expense, just message me for a quote.
For sale only, no trades.
It sounds fantastic, and is extremely versatile with the two channels. It’s just really way more amp than I need though and I could use the money for other gear at the moment. All my gigs are using IEMs and this for me is just way too much horsepower for a practice amp.
There are absolutely no functional or cosmetic issues with the amp. When I took it outside today to take the pictures, I noticed there is a tear in the bag (pictured). I’ll reach out to my Sweetwater rep or Mesa, and see if I can get a replacement.
Comes with gig bag, power cord, and all goodies. Footswitch isn’t included as that is an extra purchase item and I never bought one.
Specs from Mesa:
- Foot-switchable, 2-channel, Class A vacuum tube preamplifier with Tri-Tube topology, 3 x 12AT7 tubes
- Class D power section with 8, 4, or 2 ohm Impedance Switch
- 800W @ 4 or 2 ohms; 400W @ 8 ohms
- Channel One (Boogie Channel) with Input Gain, variable Highpass filter (25Hz–125Hz), passive 3-band EQ with Bass, Mid with variable Mid-Shift control, Treble, and Master Volume
- Channel Two (Subway Channel) with Input Gain, variable Highpass filter (25Hz–125Hz), fully active 3-band EQ (±12dB Bass, Mid, Treble) with sweepable Midrange frequency control (150Hz–2kHz), and Master Volume
- Play/Mute switch; High/Low Gain switch: Deep switch; Bright switch
- Channel/Footswitch select switch
Global O/D Symmetry control (variable, symmetrical to asymmetrical)
Protection and Limiting LED indicators
- Tube-driven, post master, balanced XLR DI Output with Line/Mic and Ground Lift switches
- Tube-driven, pre-EQ, balanced XLR DI Output with Line/Mic and Ground Lift switches
- 2 channel-Independent, fully buffered series FX Loops
- Rear-panel Tuner Output with front-panel Play/Mute switch
- External Footswitch jack for Tuner/Mute and Channel Select (footswitch available separately)
- Headphone Output; Auxiliary Input; USB Power Outlet
- 2 Speakon Speaker Output jacks
- Rugged, lightweight (7 pounds, 3 ounces) fan-cooled chassis
- Handcrafted in Petaluma, California
