Palmer Pocket Amp Bass in mint condition with new battery. A Swiss Army Knife for your bass. A Preamp/DI that can drive a power amp, feed a mixer or a DAW. It works as a headphone amp for practice with a headphone out and an AUX in for iPhone. It has THREE cab sims, 3 Band EQ with Parametric mids, and a quiet DI. It has clean, fuzz and overdrive with signal saturation, fuzz, and a blend control for these effects. It's portable, 4"x 4", quality German build, great for travel. It's in mint condition. It’s a great tool for practice, travel or for gigging. Any questions, feel free pm me.
See https://www.palmer-germany.com/en/products/guitar-effects/5140/pocket-amp-bass or here’s the details:
Providing extensive sound shaping options for active and passive bass guitars, the Pocket Bass Amp is a multi-purpose effects pedal and preamp that‘s perfect for gigging, recording and practising. It features clean, overdrive and fuzz modes with adjustable drive and saturation, a 3-band EQ with semi-parametric mid control that is specifically tuned for bass guitar and vintage or modern cabinet simulation. A blend control allows you to mix the direct and effected signals. The Pocket Bass Amp provides an insert for external effects, 3.5 mm stereo line input and headphones output for quiet play-along practice and a footswitch-assignable thru jack for silent tuning. Enabling DI applications, the balanced XLR output is pre or post effect switchable. The Pocket Bass Amp requires a 9 volt battery or power adapter and comes in a rugged diecast enclosure with heavy duty long-life footswitch, convenient LED status indicators and ground lift.
Product type: Guitar Amplifiers
Technology: solid state
Inputs: 2
Input connectors: 6.3 mm Jack
Input impedance: 1 M Ohm(s)
Outputs: 4
Output connectors: 2 x 6.3 mm TS, 3.5 mm jack, XLR
Output impedance: TRS 10000, XLR 510 Ohm(s)
Channels: 1
Indicators: on/off, peak, signal
Controls: Bass, Drive, ground lift, highs, input pad, Mid, mid frequency, mode, mute, Pre/Post, volume
FX loop: yes
Operating voltage: 9 - 12 V DC, 9 V block
Cabinet material: die-cast aluminium
Width: 100 mm (3.9")
Depth: 100 mm (3.9)
Height: 55 mm (2.1")
Weight: 0.36 kg (3/4 lb)
See https://www.palmer-germany.com/en/products/guitar-effects/5140/pocket-amp-bass or here’s the details:
Providing extensive sound shaping options for active and passive bass guitars, the Pocket Bass Amp is a multi-purpose effects pedal and preamp that‘s perfect for gigging, recording and practising. It features clean, overdrive and fuzz modes with adjustable drive and saturation, a 3-band EQ with semi-parametric mid control that is specifically tuned for bass guitar and vintage or modern cabinet simulation. A blend control allows you to mix the direct and effected signals. The Pocket Bass Amp provides an insert for external effects, 3.5 mm stereo line input and headphones output for quiet play-along practice and a footswitch-assignable thru jack for silent tuning. Enabling DI applications, the balanced XLR output is pre or post effect switchable. The Pocket Bass Amp requires a 9 volt battery or power adapter and comes in a rugged diecast enclosure with heavy duty long-life footswitch, convenient LED status indicators and ground lift.
Product type: Guitar Amplifiers
Technology: solid state
Inputs: 2
Input connectors: 6.3 mm Jack
Input impedance: 1 M Ohm(s)
Outputs: 4
Output connectors: 2 x 6.3 mm TS, 3.5 mm jack, XLR
Output impedance: TRS 10000, XLR 510 Ohm(s)
Channels: 1
Indicators: on/off, peak, signal
Controls: Bass, Drive, ground lift, highs, input pad, Mid, mid frequency, mode, mute, Pre/Post, volume
FX loop: yes
Operating voltage: 9 - 12 V DC, 9 V block
Cabinet material: die-cast aluminium
Width: 100 mm (3.9")
Depth: 100 mm (3.9)
Height: 55 mm (2.1")
Weight: 0.36 kg (3/4 lb)
