—Lot of 3 bass shims:
.25, .5, 1 degree
—I’d rather not sell separately.
—I had a couple Fender P bass projects and I tried hi mass bridges but ended up going back to the stock bridges.
—These really are nice shims.
—All in nice condition: no cracks, splits, etc.
—The width on the .25 and .5 were carefully sanded to fit the neck pockets.
—The length on the .25 was not sanded.
—The .5 length was sanded for a flush fit.
—The 1 degree is untouched and the package is sealed.
Taper specs (approximate)
0.25-degree shim tapers from 0.030" to 0.019" (0.76mm to 0.48mm)
0.5-degree shim tapers from 0.044" to 0.010" (1.11mm to 0.25mm)
1-degree shim tapers from 0.078" to 0.010" (1.98mm to 0.25mm)
Dimensions
Shaped: 2-1/2" x 3-7/8" (63.50mm x 98.43mm)
Shaped shims fit most neck pockets with a rounded heel.
32.00 shipped/PP/FF or
Zelle
CONUS
.25, .5, 1 degree
—I’d rather not sell separately.
—I had a couple Fender P bass projects and I tried hi mass bridges but ended up going back to the stock bridges.
—These really are nice shims.
—All in nice condition: no cracks, splits, etc.
—The width on the .25 and .5 were carefully sanded to fit the neck pockets.
—The length on the .25 was not sanded.
—The .5 length was sanded for a flush fit.
—The 1 degree is untouched and the package is sealed.
Taper specs (approximate)
0.25-degree shim tapers from 0.030" to 0.019" (0.76mm to 0.48mm)
0.5-degree shim tapers from 0.044" to 0.010" (1.11mm to 0.25mm)
1-degree shim tapers from 0.078" to 0.010" (1.98mm to 0.25mm)
Dimensions
Shaped: 2-1/2" x 3-7/8" (63.50mm x 98.43mm)
Shaped shims fit most neck pockets with a rounded heel.
32.00 shipped/PP/FF or
Zelle
CONUS