<<<<<<<<<<<<< $1850 Shipped >>>>>>>>>>>>
Well the time has come where I need to cut back on my rig. I'd like to find a good home for this beast.
It has been safe in my house since I purchased it from another TBer last year. I take that back, the good folks at Baer had me send it to them so they could do some factory modifications to increase the output. It sounds like a champ and is in flawless working condition. The craftsmanship is fantastic. You can tell love was put into this when it was made!
There are a couple minor scuffs on the finish that I tried to get in some of the thumbnails. I have a Baer Valkyrie box (not original, but the box they shipped it back to me with foam padding) to ship it in.
From the Baer website:
AMPLIFIER TOPOLOGY: Class A/B
POWER OUTPUT: 850w @2ohms, 635w @ 4ohms, 350w @ 8ohms
INPUTS: Passive 1/4” input jack, Active 1/4” input jack w/ -10dB pad
PREAMP: Solid state, discrete transistor
TUBE SECTION: 1 - 12AX7, 1 - 12AU7 tube amplifier circuit
EQ SECTION:
Deep: +/- 6dB @ 45Hz
Bass: +/- 10dB @ 80Hz
Low Mid: +/- 10dB @ 100Hz to 800Hz
High Mid: +/- 10dB @ 800Hz to 3.5kHz
Treble: +/- 10dB @ 4.5kHz
Bright: +6dB @ 7.5kHz
OUTPUTS:
Two Neutrik Speakon connectors. Minimum load 2ohms
DI - XLR w/level control, pre/post EQ & pre/post tube
switches
1/4” tuner out jack.
1/4“ Serial effects send and return jacks
1/4” Line Out jack
COOLING: Thermostatically controlled fan speed circuit
MUTE: Operation via front panel switch, or optional footswitch
DIMENSIONS: Standard 2U rack unit, 19”w x 3.5”h x 14”d
WEIGHT: 26lbs.
Well the time has come where I need to cut back on my rig. I'd like to find a good home for this beast.
It has been safe in my house since I purchased it from another TBer last year. I take that back, the good folks at Baer had me send it to them so they could do some factory modifications to increase the output. It sounds like a champ and is in flawless working condition. The craftsmanship is fantastic. You can tell love was put into this when it was made!
There are a couple minor scuffs on the finish that I tried to get in some of the thumbnails. I have a Baer Valkyrie box (not original, but the box they shipped it back to me with foam padding) to ship it in.
From the Baer website:
AMPLIFIER TOPOLOGY: Class A/B
POWER OUTPUT: 850w @2ohms, 635w @ 4ohms, 350w @ 8ohms
INPUTS: Passive 1/4” input jack, Active 1/4” input jack w/ -10dB pad
PREAMP: Solid state, discrete transistor
TUBE SECTION: 1 - 12AX7, 1 - 12AU7 tube amplifier circuit
EQ SECTION:
Deep: +/- 6dB @ 45Hz
Bass: +/- 10dB @ 80Hz
Low Mid: +/- 10dB @ 100Hz to 800Hz
High Mid: +/- 10dB @ 800Hz to 3.5kHz
Treble: +/- 10dB @ 4.5kHz
Bright: +6dB @ 7.5kHz
OUTPUTS:
Two Neutrik Speakon connectors. Minimum load 2ohms
DI - XLR w/level control, pre/post EQ & pre/post tube
switches
1/4” tuner out jack.
1/4“ Serial effects send and return jacks
1/4” Line Out jack
COOLING: Thermostatically controlled fan speed circuit
MUTE: Operation via front panel switch, or optional footswitch
DIMENSIONS: Standard 2U rack unit, 19”w x 3.5”h x 14”d
WEIGHT: 26lbs.
