I'd like to keep this local (Near Boston) but could ship if you want to pack and ship.B2000 Lightweight Mono Block 2050W Bass Amp Head
This is a beast of an amp just too much power for me. Nice flat voicing with powerful EQ and the ability to slightly over drive it. It's like a PA power amp with a nice boutique preamp built in. 700w at 8 ohms, 1300w at 4ohms, 2050w at 2 ohms!!! 14 lbs + case
The fan is always on so its a little to noisy for recording. At a gig it just rules! I bought this amp used and the ribbon connectors were acting up so I disassembled and treated all of the connections with Stabilant 22 which is great and expensive stuff
Amazon.com: Stabilant 22, 5ml Kit Makes 30ml of 22A - 22: Everything Else
These connections will be good for a log long time. The amp is rock solid!
I also bought a Carvin SV2 case which is included in the sale
SV2 2-Space Rack
B2000 Features:
- Discrete Class A input stages
- 12AX7 preamp tube (in/out switchable) I replaced it with a groove tube
- Active/Passive input gain switch with input CLIP indicator
- Preamp DRIVE and master VOLUME controls
- Six EQ controls: SUB BASS, BASS, LOW MID, MID, HIGH MID, and TREBLE
- Signal MUTE front panel switch (also controlled by optional FS22 footswitch)
- EFFECT LOOP front panel bypass switch (also controlled by optional FS22 footswitch)
- DIRECT OUT balanced XLR with independent LEVEL control, switchable "Pre-Post" and "Ground Lift", DC isolated
- TUNER output jack independent of MUTE switch
- Internal OPTO (optical isolation) clip-activated power amp limiter with "limiter free" normal operation
- Switchmode power supply that operates at 100,000 Hz delivering maximum efficiency while reducing weight
- Convenient auto-switching AC input for 120V 60 Hz or 240V 50 Hz
- High current combo SPEAKON™ connectors with 1/4" speaker inserts
- Metal shaft controls with threaded metal bushings mounted directly to front panel
- Power Output: 700w at 8 ohms, 1300w at 4ohms, 2050w at 2 ohms
- THD (Total Harmonic Distortion) is < 1.0%
- Tone Controls: ±12dB @ 40, 100, 400, 800, 2k, 6k (Hz)
- Drive Control: Varies input gain and harmonic content
- AC Requirements: Auto switching 120VAC 60 Hz/240VAC 50 Hz
- Rugged steel chassis
- Size: 2U rack mount, 19" wide x 10.5" deep x 3.5" high
- Weight: 14 lbs
- Made in San Diego, California
