Hello all... I am in the process of selling my entire rig so that I can fund a smaller rig that I can use for doubling. All specs and prices to follow below... I will ship any of these items CONUS ONLY!! Prices on items reflect item only and no shipping. I will get a quote for you if you would like me to ship. I live in Corpus Christi Texas so if you would like one of the items delivered in Texas, we might be able to make arrangements to do that...I don't mind driving to meet somewhere.
Trades I'm Looking for:
Epifani UL502 or UL902
Epifani Cabinets: UL 110's, UL210's , UL3x10's, UL410's or UL12's
You can pass other things by me, but I am looking for small and powerful. I play double bass and electric so I need gear that can be combined or broken up to accommodate the situation.
Pictures can be found at:
Snapfish: Share:Registration
Aguilar DB680: $900 SOLD!!!
This preamp is in great shape, regular wear, has been taken care of.
Awesome Preamp....period!!!
Specs:
Specifications:
All measurements taken with a line voltage of 120 VAC. All voltages are RMS. All noise measurements are unweighted.
Tube complement: Input Impedance: Output impedance:
Five total; two 12AX7A/7025 high-mu twin triodes and three 12AU7 medium-mu twin triodes
1 M ohm (passive mode) 56 K ohm (active mode)
Normal output = 1K ohm. Balanced output = 600 ohm Crossover outputs = 75 ohm.
Signal to noise ratio: -80 db
Power requirement: 100-120-220-240 VAC/50-60 Hz. Internally selectable. Refer to a qualified service
technician to change voltage selection. Power consumption: (at 120 VAC): 0.75 A, 87.75 W
Rack size: 2 spaces
Carver PM-350 Power Amp:$200
Regular wear, the amp has lived in the Rack case.
SPECIFICATIONS: CARVER PM-350
Power: 8 ohms, 350 W/channel 20-20kHz both channels driven with no more than 0.5X THD
Power: 4 ohms, 450 WI channel 20-20kHz both channels driven with no more than 0.5X THD
Power: 2 ohms 450 W/channel 20-20kHz both channels driven with no more than .5X THD
Bridging: 900 Watts into 8 ohms; 750 Watts into 16 ohms.
THD: Less than 0.5X at any power level £rom 20 mW to clipping
1M Distortion: less than0.1Y. SMPTE
Frequency Bandwidth: 5Hz-80kHz
Gain: 31 dB
Input Sensitivity: 1.5 V rms
Damping: 200 at 1kHz
Slew rate: 25 V/micro second
Noise: Better than 115 dB below 350 Watts, A-weighted
Inputs: Balanced to ground, XLR or TRS phone jacks
Input Impedance: 15k ohm each leg
Compatible with 25 V and 70 V systems
Mounting: Standard 19ft rack with 3.5ft space
Height: 3.Sft Width: 19"
Depth: (£ront to back o£ chassis): 11.56"
4 Space Rack:$100
Good condition, heavy hardware and sturdy construction.
Ampeg SVT-610HLF: $400
This cabinet has been through some serious use before I bought it. I know it looks like some punk rock band used it to beat their fans, but it is in full working order. Tolex is ripped in several locations, but no damage to speaker or wiring.
LF Drivers: 6 x 10”
Voice Coil: 2”
Magnet Weight (each): 30 oz
HF Drivers: Horn/Driver
Voice Coil: 1”
Magnet Weight (each): 8 oz
RMS Power Handling: 600-Watts
Frequency Response (-3dB): 53Hz-18kHz
Usable Low Frequency (-10dB): 42Hz
Nominal Impedance: 4-Ohms
Sensitivity: 98dB
Maximum SPL: 125dB
Dimensions (W x H x D inches): 24 x 40 x 16
AMPEG PR210H U.S.A. MADE: $200
Cabinet is in good shape, sounds big and punchy.. Regular wear, no Ampeg logo on grill.
PR-210H
FEATURES:
• Three Coat Urethane Polymer Finish/Sealant
• 16 Gauge Steel Grille
• Edge Armor Corner Protection
• Variable High Frequency Level
• High Frequency Driver Protection
• 2”Removable Swivel Casters
Component 1: Size Voice Coil Magnet Weight Component 2: Type Voice Coil Magnet Weight RMS Handling Program Handling Frequency Range Impedance Cabinet Design Dimensions Weight
Component 1: Size Voice Coil Magnet Weight Component 2: Type Voice Coil Magnet Weight RMS Handling Program Handling Frequency Range Impedane Cabinet Design Dimensions Weight
4-10” 2.5” 56 oz Horn/Driver 1”
10 oz 600 watts 1200 watts 42 - 18kHz 8 ohms Bass Reflex 25.5”x26.25”x18.75” 118 lbs
2-10” 2.5” 56 oz Horn/Driver 1”
10 oz 300 watts 600 watts 42 - 18kHz 8 ohms Bass Reflex 17”x26.25”x18.75”
Thanks for looking!!!
Trades I'm Looking for:
Epifani UL502 or UL902
Epifani Cabinets: UL 110's, UL210's , UL3x10's, UL410's or UL12's
You can pass other things by me, but I am looking for small and powerful. I play double bass and electric so I need gear that can be combined or broken up to accommodate the situation.
Pictures can be found at:
Snapfish: Share:Registration
Aguilar DB680: $900 SOLD!!!
This preamp is in great shape, regular wear, has been taken care of.
Awesome Preamp....period!!!
Specs:
Specifications:
All measurements taken with a line voltage of 120 VAC. All voltages are RMS. All noise measurements are unweighted.
Tube complement: Input Impedance: Output impedance:
Five total; two 12AX7A/7025 high-mu twin triodes and three 12AU7 medium-mu twin triodes
1 M ohm (passive mode) 56 K ohm (active mode)
Normal output = 1K ohm. Balanced output = 600 ohm Crossover outputs = 75 ohm.
Signal to noise ratio: -80 db
Power requirement: 100-120-220-240 VAC/50-60 Hz. Internally selectable. Refer to a qualified service
technician to change voltage selection. Power consumption: (at 120 VAC): 0.75 A, 87.75 W
Rack size: 2 spaces
Carver PM-350 Power Amp:$200
Regular wear, the amp has lived in the Rack case.
SPECIFICATIONS: CARVER PM-350
Power: 8 ohms, 350 W/channel 20-20kHz both channels driven with no more than 0.5X THD
Power: 4 ohms, 450 WI channel 20-20kHz both channels driven with no more than 0.5X THD
Power: 2 ohms 450 W/channel 20-20kHz both channels driven with no more than .5X THD
Bridging: 900 Watts into 8 ohms; 750 Watts into 16 ohms.
THD: Less than 0.5X at any power level £rom 20 mW to clipping
1M Distortion: less than0.1Y. SMPTE
Frequency Bandwidth: 5Hz-80kHz
Gain: 31 dB
Input Sensitivity: 1.5 V rms
Damping: 200 at 1kHz
Slew rate: 25 V/micro second
Noise: Better than 115 dB below 350 Watts, A-weighted
Inputs: Balanced to ground, XLR or TRS phone jacks
Input Impedance: 15k ohm each leg
Compatible with 25 V and 70 V systems
Mounting: Standard 19ft rack with 3.5ft space
Height: 3.Sft Width: 19"
Depth: (£ront to back o£ chassis): 11.56"
4 Space Rack:$100
Good condition, heavy hardware and sturdy construction.
Ampeg SVT-610HLF: $400
This cabinet has been through some serious use before I bought it. I know it looks like some punk rock band used it to beat their fans, but it is in full working order. Tolex is ripped in several locations, but no damage to speaker or wiring.
LF Drivers: 6 x 10”
Voice Coil: 2”
Magnet Weight (each): 30 oz
HF Drivers: Horn/Driver
Voice Coil: 1”
Magnet Weight (each): 8 oz
RMS Power Handling: 600-Watts
Frequency Response (-3dB): 53Hz-18kHz
Usable Low Frequency (-10dB): 42Hz
Nominal Impedance: 4-Ohms
Sensitivity: 98dB
Maximum SPL: 125dB
Dimensions (W x H x D inches): 24 x 40 x 16
AMPEG PR210H U.S.A. MADE: $200
Cabinet is in good shape, sounds big and punchy.. Regular wear, no Ampeg logo on grill.
PR-210H
FEATURES:
• Three Coat Urethane Polymer Finish/Sealant
• 16 Gauge Steel Grille
• Edge Armor Corner Protection
• Variable High Frequency Level
• High Frequency Driver Protection
• 2”Removable Swivel Casters
Component 1: Size Voice Coil Magnet Weight Component 2: Type Voice Coil Magnet Weight RMS Handling Program Handling Frequency Range Impedance Cabinet Design Dimensions Weight
Component 1: Size Voice Coil Magnet Weight Component 2: Type Voice Coil Magnet Weight RMS Handling Program Handling Frequency Range Impedane Cabinet Design Dimensions Weight
4-10” 2.5” 56 oz Horn/Driver 1”
10 oz 600 watts 1200 watts 42 - 18kHz 8 ohms Bass Reflex 25.5”x26.25”x18.75” 118 lbs
2-10” 2.5” 56 oz Horn/Driver 1”
10 oz 300 watts 600 watts 42 - 18kHz 8 ohms Bass Reflex 17”x26.25”x18.75”
Thanks for looking!!!