Tascam CD-BT1 MKII Bass Trainer. Great cosmetic and operating condition.
Only trouble I had was the CD door/lid coming off after multiple openings from the crappy design (nice plastic hinge posts Tascam)
. One post broke, so I machined some small screws and replaced both the plastic pins with metal screws. Basically, I took 1/4" long hobby screws and turned down all but about 1/16 of an inch near the head eliminating the threading. This sits inside the lower post slot while allowing the 1/16" of thread to screw into the lid post. Works like a charm, and much stronger for sure. Sorry for the long explanation, but this seems to be a common problem with these units, and the fix has worked awesome! See lower photo below for image of repair.
Comes with stock small manual,a larger one I printed that you can actually read as well as a wall wart! $45.00 shipped CONUS. For our friends up North, might be a little more. I'll split any difference with you!
Only trades I'm interested in are either a good working/decent cosmetic condition Boss TU3 or TC Electronics PolyTune (I'll kick in a little $ if necessary)!
Thanks for lookin'
Only trouble I had was the CD door/lid coming off after multiple openings from the crappy design (nice plastic hinge posts Tascam)
. One post broke, so I machined some small screws and replaced both the plastic pins with metal screws. Basically, I took 1/4" long hobby screws and turned down all but about 1/16 of an inch near the head eliminating the threading. This sits inside the lower post slot while allowing the 1/16" of thread to screw into the lid post. Works like a charm, and much stronger for sure. Sorry for the long explanation, but this seems to be a common problem with these units, and the fix has worked awesome! See lower photo below for image of repair. Comes with stock small manual,a larger one I printed that you can actually read as well as a wall wart! $45.00 shipped CONUS. For our friends up North, might be a little more. I'll split any difference with you!
Only trades I'm interested in are either a good working/decent cosmetic condition Boss TU3 or TC Electronics PolyTune (I'll kick in a little $ if necessary)!
Thanks for lookin'