This is an awesome piece of engineering from SWR and features all the analog effects specifically tailored for bass you would ever need. Combine one, two, four, or all together for some truly wacky sounds 
All the effects are touch sensitive and this is one of the few amps where you can get your own signature tone.
SWR Mo' Bass also comes with the FX bypass foot switch (which can toggle off/on your selected effects) and manual (which also can be downloaded here: http://support.swramps.com/manuals/pdfs/MoBass_OM.pdf
Specifications are below along with pictures. A couple of scratches as pictured.
As far as trades go, I'm interested in 5 string basses only. Will now sell for $500 plus $25 shipping, continental US!
Velcro on the bottom:
• Dual independent input jacks compatible with both passive and active instruments
• Pre-Amp Volume Control with bi-color (green/red) LED peak clipping indicator
• Variable Limiter/Leveler Control with yellow LED indicator
• Aural Enhancer Control
• Treble Level Control
• Midrange Level Control
• Midrange Frequency Control
• Bass Level Control
• Overdrive "Drive" Control
• Overdrive Level Control
• Subwave Tone Control
• Subwave Mix Control
• Bassynth Filter Control
• Bassynth Resonance Control
• Bassynth Envelope Control
• Bassynth Mix Control
• Mo' EQ Treble Control
• Mo' EQ Midrange Control
• Mo' EQ Bass Control
• Chorus Depth Control
• Chorus Rate Control
• Push switches and unique-colored LED indicators for on/off control of all effects
• Internal Effects Bypass Switch with LED indicator
• Left and Right External Effects Blend Controls
• Dual Mode Switch with LED indicator
• Left and Right Master Volume Controls
• Illuminated Neon Power On/Off Switch
• Stereo Headphones Jack
• Screwholes for Rack Mounting (on chassis in each corner)
MO’ BASS • REAR PANEL FEATURES
• Direct Out 1/4" jack
• Tuner Out 1/4" jack
• Mo' Bass Out 1/4" jack
• Direct Out XLR jack
• Mo' Bass Out XLR jack
• Line/Direct Switch for 1/4" and XLR Direct Out Jacks
• Individual 3-position Pad Switches (0 dB, -10 dB, -20 dB) for both Direct Out and Mo' Bass Out XLR jacks
• Ground/Lift Switch for both Direct Out and Mo' Bass Out XLR jacks
• Stereo Effects Loop (Left and Right Send and Return 1/4" jacks)
• Internal Effects Bypass Footswitch jack
• Filter Sweep Pedal jack
• "Mo' Control" Footswitch jack (shown as "Ft. Sw. In")
• MIDI Out jack
• Stereo/Mono Power Amp Assign Switch
• Two 1/4" and One Speakon Left Speaker Output jacks
• Two 1/4" and One Speakon Right Speaker Output jacks
• One Speakon Bridged/Mono Output jack
• Two Speaker Fuses (3AG, 10 amp fast-blo)
• One Line Fuse (3AG, 10 amp slow-blo)
• AC Power Cord Receptacle
Power Ratings (minimum)
Bridge/Mono Mode
900 Watts @ 4 Ohms
650 Watts @ 8 Ohms
440 Watts @ 16 Ohms
(minimum load = 4 Ohms)
Stereo Mode (per side)
600 watts @ 2 Ohms
400 watts @ 4 Ohms
250 watts @ 8 Ohms
150 watts @ 16 Ohms
(minimum load = 2 Ohms)
All the effects are touch sensitive and this is one of the few amps where you can get your own signature tone.SWR Mo' Bass also comes with the FX bypass foot switch (which can toggle off/on your selected effects) and manual (which also can be downloaded here: http://support.swramps.com/manuals/pdfs/MoBass_OM.pdf
Specifications are below along with pictures. A couple of scratches as pictured.
As far as trades go, I'm interested in 5 string basses only. Will now sell for $500 plus $25 shipping, continental US!
Velcro on the bottom:
• Dual independent input jacks compatible with both passive and active instruments
• Pre-Amp Volume Control with bi-color (green/red) LED peak clipping indicator
• Variable Limiter/Leveler Control with yellow LED indicator
• Aural Enhancer Control
• Treble Level Control
• Midrange Level Control
• Midrange Frequency Control
• Bass Level Control
• Overdrive "Drive" Control
• Overdrive Level Control
• Subwave Tone Control
• Subwave Mix Control
• Bassynth Filter Control
• Bassynth Resonance Control
• Bassynth Envelope Control
• Bassynth Mix Control
• Mo' EQ Treble Control
• Mo' EQ Midrange Control
• Mo' EQ Bass Control
• Chorus Depth Control
• Chorus Rate Control
• Push switches and unique-colored LED indicators for on/off control of all effects
• Internal Effects Bypass Switch with LED indicator
• Left and Right External Effects Blend Controls
• Dual Mode Switch with LED indicator
• Left and Right Master Volume Controls
• Illuminated Neon Power On/Off Switch
• Stereo Headphones Jack
• Screwholes for Rack Mounting (on chassis in each corner)
MO’ BASS • REAR PANEL FEATURES
• Direct Out 1/4" jack
• Tuner Out 1/4" jack
• Mo' Bass Out 1/4" jack
• Direct Out XLR jack
• Mo' Bass Out XLR jack
• Line/Direct Switch for 1/4" and XLR Direct Out Jacks
• Individual 3-position Pad Switches (0 dB, -10 dB, -20 dB) for both Direct Out and Mo' Bass Out XLR jacks
• Ground/Lift Switch for both Direct Out and Mo' Bass Out XLR jacks
• Stereo Effects Loop (Left and Right Send and Return 1/4" jacks)
• Internal Effects Bypass Footswitch jack
• Filter Sweep Pedal jack
• "Mo' Control" Footswitch jack (shown as "Ft. Sw. In")
• MIDI Out jack
• Stereo/Mono Power Amp Assign Switch
• Two 1/4" and One Speakon Left Speaker Output jacks
• Two 1/4" and One Speakon Right Speaker Output jacks
• One Speakon Bridged/Mono Output jack
• Two Speaker Fuses (3AG, 10 amp fast-blo)
• One Line Fuse (3AG, 10 amp slow-blo)
• AC Power Cord Receptacle
Power Ratings (minimum)
Bridge/Mono Mode
900 Watts @ 4 Ohms
650 Watts @ 8 Ohms
440 Watts @ 16 Ohms
(minimum load = 4 Ohms)
Stereo Mode (per side)
600 watts @ 2 Ohms
400 watts @ 4 Ohms
250 watts @ 8 Ohms
150 watts @ 16 Ohms
(minimum load = 2 Ohms)