For Sale Only
Zon Sonus Special 5 String
Here is the exact specs from Zon on this bass:
Sonus Series - Sonus Special 5
Body
Material: Two-piece select swamp ash core with bookmatched Bubinga top.
Finish: Flat satin (gloss available at extra charge)
Color: Natural.
Neck
Type: Composite, bolt-on design
Scale length: 34"
Finish: Flat urethane
Fingerboard: Phenowood w/side dot markers
Radius: 12"
Nut: Graphite
Frets/size: 24/medium
Width at nut: 1.875"
Width at 24th fret: 2.875"
Electronics Upgrade/Option Installed on this Bass
ZB-4.3
Description: Hand-assembled components housed in an electrostatically shielded, epoxy module
Function: Master volume, pickup blend, bass, midrange, and treble boost/cut with 3-position midrange frequency switch
Specifications: Output level -10dBm
Power requirements: One 9-volt battery
Battery life expectancy: 500 hours continuous use
About the system
Master volume control. Controls overall volume level. Turning the control clockwise increases the volume; turning the control counterclockwise decreases the volume.
Pickup blend control. Controls relative blend of pickups. Turning the control clockwise emphasizes the bridge pickup. Turning the control counterclockwise emphasizes the neck pickup. The detent, or “click,” in the center of the control is the point where both pickups are on equally.
Bass control. 15dB boost or cut of bass at a center frequency of 50 Hz. Turning the control clockwise boosts the bass. Turning the control counterclockwise cuts the bass. The detent, or “click,” in the center of the control is the “flat” position, zero boost or cut.
Midrange control. 15dB boost or cut of midrange at a center frequency determined by the switch selection. Turning the control clockwise boosts the mids. Turning the control counterclockwise cuts the mids. The detent, or “click,” in the center of the control is the “flat” position, zero boost or cut.
Treble control. 15dB boost or cut of treble at a center frequency of 5kHz. Turning the control clockwise boosts the treble. Turning the control counterclockwise cuts the treble. The detent, or “click,” in the center of the control is the “flat” position, zero boost or cut.
Mid frequency switch (ZB-4.3 only). Down position @ 250 Hz. Center position @ 400 Hz. Up position @ 700 Hz.
Pickup input level trimmer (ZB-4.0 only). Attenuates input level from pickups. Turning clockwise increases input level from pickups to preamp. While this increases gain, too much input level can cause distortion. Factory setting is set clockwise, just under the first sign of distortion.
Output level trimmer. This control on the circuit module attenuates overall output level. Its factory setting is the mid position.
This Bass was built in 2003 and does not have a truss rod
PUMake: Exclusively designed for Zon by Bartolini.
Type: Neck: narrow aperture, passive, linear single coil design. JB style shell.
Bridge: narrow aperture, passive, linear single coil design. JB style shell.
Hardware
Bridge: ZON. Machined brass.
String spacIng .687"/17mm (string-to-string center)
Tuners: Gotoh GB-7
Finish: Chrome
Options
General: • Fretless -lined, blank or half lined. (no dots on board face) • Matching headstock • 3-band active electronics • Black hardware • Gold hardware • Hipshot x-tender • Left-handed
Other
Zon Gig bag included
This Bass was built in 2003 and does not have a truss rod
It is in Exc condition and plays even better
This bass is a great live bass and cuts through the mix live very well!
Im in no hurry or need to sell and the only reason I am offering is Im playing my Lakland fretless 5 live now and a bass this nice needs to be played.
Price is $1725 shipped FedX to you Con USA
Paypal is good.
PM if you have any questions
Zon Sonus Special 5 String
Here is the exact specs from Zon on this bass:
Sonus Series - Sonus Special 5
Body
Material: Two-piece select swamp ash core with bookmatched Bubinga top.
Finish: Flat satin (gloss available at extra charge)
Color: Natural.
Neck
Type: Composite, bolt-on design
Scale length: 34"
Finish: Flat urethane
Fingerboard: Phenowood w/side dot markers
Radius: 12"
Nut: Graphite
Frets/size: 24/medium
Width at nut: 1.875"
Width at 24th fret: 2.875"
Electronics Upgrade/Option Installed on this Bass
ZB-4.3
Description: Hand-assembled components housed in an electrostatically shielded, epoxy module
Function: Master volume, pickup blend, bass, midrange, and treble boost/cut with 3-position midrange frequency switch
Specifications: Output level -10dBm
Power requirements: One 9-volt battery
Battery life expectancy: 500 hours continuous use
About the system
Master volume control. Controls overall volume level. Turning the control clockwise increases the volume; turning the control counterclockwise decreases the volume.
Pickup blend control. Controls relative blend of pickups. Turning the control clockwise emphasizes the bridge pickup. Turning the control counterclockwise emphasizes the neck pickup. The detent, or “click,” in the center of the control is the point where both pickups are on equally.
Bass control. 15dB boost or cut of bass at a center frequency of 50 Hz. Turning the control clockwise boosts the bass. Turning the control counterclockwise cuts the bass. The detent, or “click,” in the center of the control is the “flat” position, zero boost or cut.
Midrange control. 15dB boost or cut of midrange at a center frequency determined by the switch selection. Turning the control clockwise boosts the mids. Turning the control counterclockwise cuts the mids. The detent, or “click,” in the center of the control is the “flat” position, zero boost or cut.
Treble control. 15dB boost or cut of treble at a center frequency of 5kHz. Turning the control clockwise boosts the treble. Turning the control counterclockwise cuts the treble. The detent, or “click,” in the center of the control is the “flat” position, zero boost or cut.
Mid frequency switch (ZB-4.3 only). Down position @ 250 Hz. Center position @ 400 Hz. Up position @ 700 Hz.
Pickup input level trimmer (ZB-4.0 only). Attenuates input level from pickups. Turning clockwise increases input level from pickups to preamp. While this increases gain, too much input level can cause distortion. Factory setting is set clockwise, just under the first sign of distortion.
Output level trimmer. This control on the circuit module attenuates overall output level. Its factory setting is the mid position.
This Bass was built in 2003 and does not have a truss rod
PUMake: Exclusively designed for Zon by Bartolini.
Type: Neck: narrow aperture, passive, linear single coil design. JB style shell.
Bridge: narrow aperture, passive, linear single coil design. JB style shell.
Hardware
Bridge: ZON. Machined brass.
String spacIng .687"/17mm (string-to-string center)
Tuners: Gotoh GB-7
Finish: Chrome
Options
General: • Fretless -lined, blank or half lined. (no dots on board face) • Matching headstock • 3-band active electronics • Black hardware • Gold hardware • Hipshot x-tender • Left-handed
Other
Zon Gig bag included
This Bass was built in 2003 and does not have a truss rod
It is in Exc condition and plays even better
This bass is a great live bass and cuts through the mix live very well!
Im in no hurry or need to sell and the only reason I am offering is Im playing my Lakland fretless 5 live now and a bass this nice needs to be played.
Price is $1725 shipped FedX to you Con USA
Paypal is good.
PM if you have any questions