So, I'm selling my beloved pedal board. It's a gorgeous one-off that Spencer did for Mesa/Boogie for one of the recent NAMM shows (2013?). So it's covered with Mesa Black Taurus tolex. (Note: it is not the one you can see on their website with the light up logo) It is their typical 36x12 angled series board with matching tolexed hard case. It has been a basement board and was never gigged. It does have some scuffs here and there but no real damage. However, the handle for the case pulled out, but has been repaired. The deck is covered with their Super Loop velcro covering which works great. The deck also has 2 slots down the middle to run cords in and out. I mounted a CAE MC-403 underneath and it fit fine, though it ended up covering part of one slot. But those supplies are pretty large. It has 2 locking Neutrik 1/4" jacks on one side and a power input on the other. The Neutriks are each attached to a George L patch cable. I fit 18 pedals on there, but you need small, flexible patches to get that many on there comfortably (unless you have all small, top-loading effects). It would come with a 6' extension cord.
I just ran the specs through their custom shop site, and to build something like this today would cost you $650+ (not including shipping). I can let this go for less than half that ($275 shipped; ask about local pick up/drop off [Southern New Hampshire]).
The first two pics are from WCPB, the other shows it in the midst of a rebuild. Feel free to PM with any questions.
I just ran the specs through their custom shop site, and to build something like this today would cost you $650+ (not including shipping). I can let this go for less than half that ($275 shipped; ask about local pick up/drop off [Southern New Hampshire]).
The first two pics are from WCPB, the other shows it in the midst of a rebuild. Feel free to PM with any questions.
