For Sale or Trade is my MTD535
This thing destroys and sounds just incredible. I'm very very impressed with it as its my first Mtd. Wish I could keep it but I love Foderas almost to a fault
On to trades
I'm looking for a Fodera standard or custom
F basses and other hand made basses
$4000 USD shipped conus
If you want to do outside of conus, we can work something out as I'm willing to ship far and wide.
There are DR hi beams 45-125 I just put on last Saturday so they are pretty fresh. I will also include two extra brand new 9vs.
Comes with tools Including the 4m truss rod wrench that is not pictured.
this bass is over 7000 if you want it new as it has some nice upgrades
Some words from mike Tobias when I bought it-
email: [email protected] www: http://www.mtdbass.com
Dear Customer,
Thank you for selecting this bass as your new instrument.
This is an MTD535-24. This is the 1092nd bass of my MTD series.
The body is ash with a one piece maple burl top.
The neck is ash with a maple fingerboard. This bass is delivered with the revolutionary Buzz Feiten Tuning system.
This bass is 35" scale with 24 frets. The neck and body are hand finished with an epoxy base coat and catalyzed urethane topcoat.
The new truss rod is a true double acting rod and will adjust in both directions. It is adjustable with the 4 mm Allen wrench supplied
The pick-ups and active electronics are custom made by Bill Bartolini. The controls are: master volume and a pan pot, treble, mid, bass cut and boost, with center click (from neck to bridge). The three position switch selects the mid range cut and boost point. Down is lower mids (250); center is middle (500) and up is upper mids (1000). When the mid pot is at center click, the switch has minimal effect. This eq has 2 batteries and is a +/- 9 volt system. Be especially careful not to change the batteries when the bass is plugged in. There is a trim pot inside the control cavity to adjust the gain.
There is great variety in the settings of the EQ.
Michael Tobias, Luthier
This thing destroys and sounds just incredible. I'm very very impressed with it as its my first Mtd. Wish I could keep it but I love Foderas almost to a fault
On to trades
I'm looking for a Fodera standard or custom
F basses and other hand made basses
$4000 USD shipped conus
If you want to do outside of conus, we can work something out as I'm willing to ship far and wide.
There are DR hi beams 45-125 I just put on last Saturday so they are pretty fresh. I will also include two extra brand new 9vs.
Comes with tools Including the 4m truss rod wrench that is not pictured.
this bass is over 7000 if you want it new as it has some nice upgrades
Some words from mike Tobias when I bought it-
email: [email protected] www: http://www.mtdbass.com
Dear Customer,
Thank you for selecting this bass as your new instrument.
This is an MTD535-24. This is the 1092nd bass of my MTD series.
The body is ash with a one piece maple burl top.
The neck is ash with a maple fingerboard. This bass is delivered with the revolutionary Buzz Feiten Tuning system.
This bass is 35" scale with 24 frets. The neck and body are hand finished with an epoxy base coat and catalyzed urethane topcoat.
The new truss rod is a true double acting rod and will adjust in both directions. It is adjustable with the 4 mm Allen wrench supplied
The pick-ups and active electronics are custom made by Bill Bartolini. The controls are: master volume and a pan pot, treble, mid, bass cut and boost, with center click (from neck to bridge). The three position switch selects the mid range cut and boost point. Down is lower mids (250); center is middle (500) and up is upper mids (1000). When the mid pot is at center click, the switch has minimal effect. This eq has 2 batteries and is a +/- 9 volt system. Be especially careful not to change the batteries when the bass is plugged in. There is a trim pot inside the control cavity to adjust the gain.
There is great variety in the settings of the EQ.
Michael Tobias, Luthier