IMG_2880[1].JPG

For sale Bag End Q10BX-D 4x10 cab

Sold
$600.00
Status
This item has been sold and is no longer available!

Details

For sale: one Bag End coaxial Q10BX-D 4x10 cab. This mighty beast , lo it doth roar!! I bought this used locally last year and it has only been out on one gig since then, so by my own personal de-clutteration formula, it must go! Based upon the serial # I'd say this cab is almost 10 years old, yet it's in pristine condition.

As an upright bassist who frequently employs a fingerboard transducer (or "click") pickup. I find that the Bag End Deep Red Dustcap driver (a 10" bass speaker with a 2" compression driver added) translates the snap of slap bass far better than any tweeter. In fact, I'm holding onto a pair of Bag End coaxial 2x10s for exactly this reason.

All drivers work as they should. The Speakon and 1/4' inputs work. I wasn't able to test the banana jacks as I don't own a banana cable. The carpeted covering, the corners, and the side handles all show very minimal wear. There is one very small dent in the metal grille. By the look of it, this cab has been well-kept its entire life.

From the Bag End manual:
The Bag End® Q10BX-D is a compact quad 10” Coaxial musical instrument speaker
well matched to acoustic instruments of all types, electric bass, or synthesizers. The
Deep Red dust cap indicates a Coaxial driver that includes a 10” cone for lows and
mids, a crossover network, and a 1” titanium diaphragm compression driver for
extending the high frequency response. It has damped spring loaded handles, shock
absorbing corners, and a 3/4” thick plywood cabinet covered in our Deep Red carpet.

Specifications:
  • Enclosure: 3/4" 7-ply poplar plywood
  • Transducers: 4 - 10" cone, 1 - Compression driver
  • Input Connectors: 1 - Dual Banana, 2 - 1/4" Phone, 2 - Neutrik Speakon
  • Grille: 16 Gauge black vinyl coated perforated steel
  • Standard Hardware: 2 - Recessed handles, 8 - Protective corners
  • System Type: 2-way, rear vented 4.6 cubic ft.
  • Impedance: 8 Ohms
  • Crossover Network: Passive filter type @ 3.7 kHz
  • Frequency Response: 40 Hz to 20 kHz ? 6 dB (4 pi Steradians)
  • Sensitivity: 103 dB SPL (1W @ 1m)
  • Power Handling: 800 W continuous sine wave, 1600 W instantaneous peak
  • Finish: Deep Red carpet
  • Dimensions: 28"h x 22.5"w x 18.5"d
  • Weight: 96 lbs.
  • Shipping Dimensions: 21" x 30" x 25"
  • Shipping Weight: 107 lbs.
  • IMG_2880[1].JPG IMG_2883[1].JPG IMG_2881[1].JPG IMG_2878[1].JPG q10bx-d1.jpg
This cab is still in production and sells for over $1200 new.
I'd like to get $600 for this very excellent one. PayPal transfer preferred.
Local pickup preferred, but I can drive up to 75 miles each way to facilitate a sale.
I don't want to deal with shipping, but if you really want this cab and need it shipped, I'll cover shipping costs above $100 for Fed Ex. ground.

I'll consider trades for (or toward) Greenboy cabs or an Evil Twin DI.



Comments

Aug 12, 2011
1,983
1,327
NorCal
Funny I just circled back through the interweb to find this post again from google images. Cab has been the primary again since picking it up from Joe. I'm still convinced this is my old cab purchased new around 2000 and sold around 2005. Still not worse for wear. Nice to have a deal where you get something back for the price you sold it.
 

Classified ad information

Posted by
Joe Kyle Jr.
Feedback score
+47 /0 /-0
Category
For Sale: Amps, Preamps, and Cabinets
Views
2,369

More from Joe Kyle Jr.