IMG_4739.JPG

For sale ACG EQ-02 filter preamp (Alembic/Wal style)

Sold
$160,130.00
Status
This item has been sold and is no longer available!

Details

THE $160 ONE HAS BEEN SOLD!
NOW BOTH THE UNITS ARE SOLD.

Actually, I have two of these for sale.
These are the 5-knob versions - volume, pickup blend, lowpass stacked, highpass stacked, passive tone. However, you can omit the passive tone and/or pickup blend (if you are running a single pickup) for a 4 or a 3 hole configuration. Extremely high quality units. A nice alternative to all the usual bass/mid/treble preamps.

If you want to read up on these, here's the BestBassGear writeup:

ACG EQ 02 Preamp - Best Bass Gear

and here's the installation manual:

http://www.acguitars.co.uk/docs/eq02Manual2008.pdf

The two units I'm selling are identical, with the exception that one of them is pristine, while the second one has had the two stacked pots altered. They were shortened a bit, to allow for mounting in a very thin-bodied bass. They still work well (stacked knobs attach fine), but look a bit uglier (of course, you'll never see it). Also, the highpass frequency ring has a slight bend to it.

Pristine unit: $160 shipped
Almost-pristine unit: $130 shipped.

Paypal and US shipping only.

IMG_4739.JPG
IMG_4740.JPG
IMG_4741.JPG
IMG_4742.JPG
IMG_4743.JPG
  • Like
Reactions: blindrabbit

Comments

Nov 25, 2014
148
89
53
Portland, OR
I would have no idea - I've never played a Wal bass (nor an Alembic). I imagine it's much down to the pickups, body wood, etc.
If all those things were equal, I suspect you could get pretty close using this preamp.
 

sunbeast

Supporting Member
Jul 19, 2006
15,406
15,580
45
Denver, CO
emptypalace.bandcamp.com
How close would you rate these to an actual wal type sound?
I've never owned a Wal, but had an Alembic pickup/ filter preamp set that I directly compared to my old ACG preamp. If you paired the pre with a super low-impedance/ low output pickup I think you'd probably be able to get a great Alembic or Wal type of tone out of it (the pickups on both those basses are fairly unique for passive pickups, and really designed to be paired with a preamp). Normal output passive pickups limit the frequency response of the preamp in the high end because the frequency response of the pickups starts rolling off in the hi-mid/low-treble region where the preamp really does alot of its magic in those basses. At least in the case of Alembic pickups, the pickups themselves are fairly weak and lack much inherent character apart from a fairly flat frequency response, which is the perfect response to let the preamp shine.
These are fantastic preamps though if you really dig that kind of sound (which can't really be emulated by anything but a resonant filter-based pre)- you just might have to be prepared to find the right pickup pairing to get you where you want to go!
 

Guitarman355

Guest
Mar 26, 2015
39
9
35
I've never owned a Wal, but had an Alembic pickup/ filter preamp set that I directly compared to my old ACG preamp. If you paired the pre with a super low-impedance/ low output pickup I think you'd probably be able to get a great Alembic or Wal type of tone out of it (the pickups on both those basses are fairly unique for passive pickups, and really designed to be paired with a preamp). Normal output passive pickups limit the frequency response of the preamp in the high end because the frequency response of the pickups starts rolling off in the hi-mid/low-treble region where the preamp really does alot of its magic in those basses. At least in the case of Alembic pickups, the pickups themselves are fairly weak and lack much inherent character apart from a fairly flat frequency response, which is the perfect response to let the preamp shine.
These are fantastic preamps though if you really dig that kind of sound (which can't really be emulated by anything but a resonant filter-based pre)- you just might have to be prepared to find the right pickup pairing to get you where you want to go!
Thanks for the info, my friend. Well, I had planned on buying a set after I had researched about building my own multi-coil pups, but I guess it wasnt meant to be.
 

Classified ad information

Posted by
PDX Mathias
Feedback score
+3 /0 /-0
Category
For Sale: Parts, Strings, and Accessories
Views
3,892