SUPER MADNESS PRICE DROP 
$400 SHIPPED!!!
Greetings!
I have for sale a NEW/MINT Fender Steve Harris P Bass Neck (MIJ) Loaded! It is a beautiful piece of work! It has never been mounted by me (Giggity). I purchased this neck from The Stratosphere Guitar Parts in February of 2015.
Upon the day I received it, I gave it a good once over. I did that today, as well! The neck is as mentioned, in "NEW/MINT" condition. I worded it this way as there are two marks on the neck, as the two last images will show. Let me state this . . .
* I SUFFER FROM A DEBILITATING, SEVERE FORM OF OCD. IF THESE TWO "MARKS" DO NOT CAUSE ME WORRY, THEN THEY DEFINITELY WILL NOT EVEN REGISTER FOR YOU. *
At the very tip of the headstock, there is a minuscule ding. THERE IS NO LOSS OF FINISH. The other "mark" is a slight scuff at the heel end of the neck. It is located where the neck touches the body in the routed pocket. The picture will show this, but basically you run your fingers over the last fret and onto the very bottom end of the heel. I do not even think this scuff is high enough to sit over the highest part of the route pocket when the neck is eventually mounted onto a body.
* AS A REFERENCE, I ASKED MY SPOUSE TO FIND THESE TWO MARKS. SHE COULD NOT UNTIL I POINTED TO THEM UNDER BRIGHT LIGHT AND HAD HER FEEL THE TWO MARKS WITH HER FINGERS. *
The pictures should do a real good job of answering any questions you may have. The last two images of the neck are where the marks are located. I used the "paintbrush" option to circle with red the location of these two marks. ALSO, THERE IS QUITE A BIT OF FLASH FROM THE CAMERA IN THESE IMAGES. I ASSURE YOU, THESE ARE JUST BRIGHT REFLECTIONS DURING THE FLASHING OF THE CAMERA.....
.....
If you have any questions, feel free to ask. I have also shown an image of the Truss Rod Adjustment Tool I am tossing in the deal. It is a perfect metric fit!!! To my knowledge, Fender does not sell the correct size for Made In Japan Basses. This Truss Rod Adjustment Tool is the correct fit.
I am humbly asking $400 SHIPPED for the loaded neck. And toss the truss rod tool in to boot! I take pride in my packing, so it will meet to your satisfaction!
CONUS only, please.
I thank you for your time, and have a great evening/day!!!
P.S. I have had and still do have a collection of the Signature Steve Harris P Bass Fender models. So I feel I can confidently say that these necks are worth every penny!!!
$400 SHIPPED!!! Greetings!
I have for sale a NEW/MINT Fender Steve Harris P Bass Neck (MIJ) Loaded! It is a beautiful piece of work! It has never been mounted by me (Giggity). I purchased this neck from The Stratosphere Guitar Parts in February of 2015.
Upon the day I received it, I gave it a good once over. I did that today, as well! The neck is as mentioned, in "NEW/MINT" condition. I worded it this way as there are two marks on the neck, as the two last images will show. Let me state this . . .
* I SUFFER FROM A DEBILITATING, SEVERE FORM OF OCD. IF THESE TWO "MARKS" DO NOT CAUSE ME WORRY, THEN THEY DEFINITELY WILL NOT EVEN REGISTER FOR YOU. *
At the very tip of the headstock, there is a minuscule ding. THERE IS NO LOSS OF FINISH. The other "mark" is a slight scuff at the heel end of the neck. It is located where the neck touches the body in the routed pocket. The picture will show this, but basically you run your fingers over the last fret and onto the very bottom end of the heel. I do not even think this scuff is high enough to sit over the highest part of the route pocket when the neck is eventually mounted onto a body.
* AS A REFERENCE, I ASKED MY SPOUSE TO FIND THESE TWO MARKS. SHE COULD NOT UNTIL I POINTED TO THEM UNDER BRIGHT LIGHT AND HAD HER FEEL THE TWO MARKS WITH HER FINGERS. *
The pictures should do a real good job of answering any questions you may have. The last two images of the neck are where the marks are located. I used the "paintbrush" option to circle with red the location of these two marks. ALSO, THERE IS QUITE A BIT OF FLASH FROM THE CAMERA IN THESE IMAGES. I ASSURE YOU, THESE ARE JUST BRIGHT REFLECTIONS DURING THE FLASHING OF THE CAMERA.....
.....
If you have any questions, feel free to ask. I have also shown an image of the Truss Rod Adjustment Tool I am tossing in the deal. It is a perfect metric fit!!! To my knowledge, Fender does not sell the correct size for Made In Japan Basses. This Truss Rod Adjustment Tool is the correct fit.
I am humbly asking $400 SHIPPED for the loaded neck. And toss the truss rod tool in to boot! I take pride in my packing, so it will meet to your satisfaction!
CONUS only, please.
I thank you for your time, and have a great evening/day!!!
P.S. I have had and still do have a collection of the Signature Steve Harris P Bass Fender models. So I feel I can confidently say that these necks are worth every penny!!!
-
Image 1.jpg -
Image 2.jpg -
Image 3.jpg -
Image 4.jpg -
Image 5.jpg -
Image 6.jpg -
Image 7.jpg -
Image 8.jpg -
Image 9.jpg -
Image 10.jpg -
Image 11.jpg -
Image 12.jpg -
Image 13.jpg -
Image 14.jpg -
Image 15.jpg -
Image 16.jpg -
Image 17.png -
Image 18.jpg