Mike Pope Flexcore Preamp - 5 Knob

I'm selling my Mike Pope Flexcore preamp which was used for a few months in my Lakland 55-02. Works perfectly and sounds great but I'm going to do something different with that bass so I'm offering this pristine Flexcore at an amazing price so I can fund my next experiment.

Here's the scoop:

Supports 2 pickups
Volume Knob (pull for passive)
Blend Knob
Tone Knob (works in active or passive mode)
Stacked Bass/Treble
Stacked Low Mid/High Mid
Low Mid frequency select switch
High Mid frequency select switch

It will run 9v or 18v. I used the internal battery box so the 9v connector is clipped off of one set of wires. This is an easy fix. Solder on a new one, or solder the wires together for 9v operation. Easy stuff.

You can adjust the bass and treble frequencies with jumpers but they are all set to factory default of 64hz and 6000hz respectively. The frequencies can be set as follows...the mid frequences have the external switches and can be switched on the fly.

Treble: +/- 15dB @ 6kHz or 10kHz
Hi Mid: +/- 15dB @ 1kHz or 1.8kHz
Lo Mid: +/-12dB @ 330Hz or 473Hz
Bass: +/- 12dB @ 46Hz or 90Hz

Also supplied are "Sadowsky" style knobs. Three single knobs for the Volume, Blend, and Tone as well as two concentric knobs for the bass/treble and hi mid/lo mid.

Enough of the boring stuff...lets see the goods!