For sale: Sadowsky onboard preamp, 4 knob version. No soldering required, tried it out for a couple weeks, decided to go another route. Extremely flexible, a little bit goes a very long way.
$200
Paypal only (unless local).
Description
The Sadowsky 4 knob Onboard Bass Preamp is a completely prewired system offering the same controls and preamp as all Sadowsky Basses.
The controls are: Volume-Pan-VTC-Treble/Bass. VTC stands for Vintage Tone Control (pull up the knob for total bypass).
The preamp can be installed either with the included control plate or mounted through a rear control cavity in either a 4-in-line or diamond pattern.
Your pickups attach via solderless connectors at the pan pot. The direction of the pan pot can be easily reversed by which pickup terminals are used.
Installation requires a side jack and a battery compartment. We recommend shielding the control cavity and pickup cavities at the time of installation. We also recommend installation by a professional guitar technician or builder if routing and drilling for a battery compartment and/or side jack is required.
This system is not compatible with EMG or any other active pickups requiring anything other than a 250K or 500K volume pot. For these applications, please custom order a parts only preamp kit and use your original volume pot.
$200
Paypal only (unless local).
Description
The Sadowsky 4 knob Onboard Bass Preamp is a completely prewired system offering the same controls and preamp as all Sadowsky Basses.
The controls are: Volume-Pan-VTC-Treble/Bass. VTC stands for Vintage Tone Control (pull up the knob for total bypass).
The preamp can be installed either with the included control plate or mounted through a rear control cavity in either a 4-in-line or diamond pattern.
Your pickups attach via solderless connectors at the pan pot. The direction of the pan pot can be easily reversed by which pickup terminals are used.
Installation requires a side jack and a battery compartment. We recommend shielding the control cavity and pickup cavities at the time of installation. We also recommend installation by a professional guitar technician or builder if routing and drilling for a battery compartment and/or side jack is required.
This system is not compatible with EMG or any other active pickups requiring anything other than a 250K or 500K volume pot. For these applications, please custom order a parts only preamp kit and use your original volume pot.