Putting out feelers on this.
Zon Legacy Elite 6. This was originally owned by Paul Arntz, bassist for Lee Greenwood. I received in a trade earlier this year. Specs are as follows from the Zon site.
Body
Material: Two-piece select mahogany core with master-grade figured top
Finish: Gloss
Color: Natural
Neck
Type: Composite, set-in design
Scale length: 34"
Finish: Polyester gloss
Fingerboard: Phenowood w/side dot markers and abalone face dots
Radius: 12"
Nut: Graphite
Frets/size: 24/medium
Width at nut: 2.125"
Width at 24th fret: 3.250"
Electronics
Type: ZP-2DM active system made for Zon by Polyfusion
Functions: Master volume, pickup blend, bass, treble, and midrange controls Boost/cut ą15dB
Power requirements: Single 9-volt battery
Life expectancy: 300 hours of continuous use
Pickup
Make: Exclusively designed for Zon by Bartolini
Type: Neck: wide-aperture, passive, dual coil design Soapbar-style shell
Bridge: wide-aperture, passive, dual-coil design Soapbar-style shell
Hardware
Bridge: ZON machined brass
String spacIng .656"/16.5mm (string-to-string center)
Tuners: Gotoh GB-7
As I understand from Paul, he used this on tour a lot, so it's seen some wear. Per Paul and confirmed by Martin at Zon, the finish on this and other basses of this particular run was prone to cracking and flaking off the back of the neck due to the vibration of the carbon fiber neck as shown in the photos.
It has not affected the playability of the bass at all.
The price includes shipping. Please do not lowball as I'm perfectly content to keep it if the right offer doesn't come about.
The only trade I will consider is for a Dingwall Combustion or NG in a 5 or 6 string.
Thanks!
Zon Legacy Elite 6. This was originally owned by Paul Arntz, bassist for Lee Greenwood. I received in a trade earlier this year. Specs are as follows from the Zon site.
Body
Material: Two-piece select mahogany core with master-grade figured top
Finish: Gloss
Color: Natural
Neck
Type: Composite, set-in design
Scale length: 34"
Finish: Polyester gloss
Fingerboard: Phenowood w/side dot markers and abalone face dots
Radius: 12"
Nut: Graphite
Frets/size: 24/medium
Width at nut: 2.125"
Width at 24th fret: 3.250"
Electronics
Type: ZP-2DM active system made for Zon by Polyfusion
Functions: Master volume, pickup blend, bass, treble, and midrange controls Boost/cut ą15dB
Power requirements: Single 9-volt battery
Life expectancy: 300 hours of continuous use
Pickup
Make: Exclusively designed for Zon by Bartolini
Type: Neck: wide-aperture, passive, dual coil design Soapbar-style shell
Bridge: wide-aperture, passive, dual-coil design Soapbar-style shell
Hardware
Bridge: ZON machined brass
String spacIng .656"/16.5mm (string-to-string center)
Tuners: Gotoh GB-7
As I understand from Paul, he used this on tour a lot, so it's seen some wear. Per Paul and confirmed by Martin at Zon, the finish on this and other basses of this particular run was prone to cracking and flaking off the back of the neck due to the vibration of the carbon fiber neck as shown in the photos.
It has not affected the playability of the bass at all.
The price includes shipping. Please do not lowball as I'm perfectly content to keep it if the right offer doesn't come about.
The only trade I will consider is for a Dingwall Combustion or NG in a 5 or 6 string.
Thanks!
