2013 Custom Stambaugh Bass
6 String
Neck Through
28 Frets
33" Scale
18mm Hipshot Bridge with through the body option
Single Cut
Mahogany Body Wings
Walnut Tone Block
Kingwood Fretboard
Spalted Maple Top
5 Piece Ash Neck with Wenge Stringers
Hipshot Tuning Machines with a 2 stage detuner on the lowest string
3 flush fit strap locks for double shoulder straps
Kingwood pickup covers
Kingwood finger ramp
2 Quick-access battery compartment
18v Pope preamp
Piezo Pickups
13 pin Ghost midi system
I don’t remember what pickups I put in this, Most likely Bartolini, Fodera EMGs, or Aguilars I honestly can’t remember.
EQ is as follows
/ Kill Switch
/ Active/Passive Switch O Piezo Blend O Neck Pick up Volume O Bridge Pick up Volume/Passive Tone
/ Piezo on/off
/ Midi on/off
/ 3 Way midi out signal blend O Midi Output Vol O Trebel/Bass O High mid/Low mid
/ Midi navigation up/down
Instrument condition:
It has some scratches near the flush strap lock on the back of the bass. Otherwise, this is a mint condition instrument.
Asking $2,250 Shipped w/Mono Double Gigbag to the contiguous United States. Will ship elsewhere if buyer fronts shipping costs and any shipping fees.
Please allow me to answer any questions you may have about this instrument.
The original purchase was for $3,600 and a 9-month wait. It’s a surprisingly lightweight 10.3lb instrument. This was built to be able to do everything you could ever want to do on bass. The woods were selected to balance the bass’s tone in conjunction with pickups and preamp. This bass plays like a dream and I’m very proud of the instrument I’ve designed. I’m currently selling this instrument to help fund a move to begin law school.
This bass is currently located in San Diego, CA, USA
Edit:
I found my OG order spec sheet
6 strings
28 fret
-Mandolin Frets
33"
Hipshot A Bridge
-18mm
-Brass
-Black
-String through body
-GHOST MIDI Piezo w/system
Single cut
-Chambered upper horn
-Mahogany body
-Walnut Tone block
Neck Through
-5 piece equal sized Ash neck w/ 2 Wenge stripes
-Reenforced w/graphite or titanium
-Dual action truss rod
Kingwood fingerboard
-Mother of Pearl dot position markers.
-10" to 16" compound radius
Nordstrand Dual Coil pickups
-Finger board Radius matched Kingwood Pickup covers
-Carey@ Nordstrand said he could arch the coils so that stings sound at the same volume
-No exposed poles
Spalted maple top
-Black veneer between top and body
-Matching Head stock
Mike Pope pre
- Vol, Vol/Tone, Treble/Bass, Hi MId/Low Mid, w/active, coil, and stand by switches
Brass nut
-Width 52mm
Urethane finish
-Satin
Kingwood Playing ramp
-Finger board Radius matched
Dunlop strap locks flush mounted
Tummy Cut
Forearm Contour
Low B D-tuner
6 String
Neck Through
28 Frets
33" Scale
18mm Hipshot Bridge with through the body option
Single Cut
Mahogany Body Wings
Walnut Tone Block
Kingwood Fretboard
Spalted Maple Top
5 Piece Ash Neck with Wenge Stringers
Hipshot Tuning Machines with a 2 stage detuner on the lowest string
3 flush fit strap locks for double shoulder straps
Kingwood pickup covers
Kingwood finger ramp
2 Quick-access battery compartment
18v Pope preamp
Piezo Pickups
13 pin Ghost midi system
I don’t remember what pickups I put in this, Most likely Bartolini, Fodera EMGs, or Aguilars I honestly can’t remember.
EQ is as follows
/ Kill Switch
/ Active/Passive Switch O Piezo Blend O Neck Pick up Volume O Bridge Pick up Volume/Passive Tone
/ Piezo on/off
/ Midi on/off
/ 3 Way midi out signal blend O Midi Output Vol O Trebel/Bass O High mid/Low mid
/ Midi navigation up/down
Instrument condition:
It has some scratches near the flush strap lock on the back of the bass. Otherwise, this is a mint condition instrument.
Asking $2,250 Shipped w/Mono Double Gigbag to the contiguous United States. Will ship elsewhere if buyer fronts shipping costs and any shipping fees.
Please allow me to answer any questions you may have about this instrument.
The original purchase was for $3,600 and a 9-month wait. It’s a surprisingly lightweight 10.3lb instrument. This was built to be able to do everything you could ever want to do on bass. The woods were selected to balance the bass’s tone in conjunction with pickups and preamp. This bass plays like a dream and I’m very proud of the instrument I’ve designed. I’m currently selling this instrument to help fund a move to begin law school.
This bass is currently located in San Diego, CA, USA
Edit:
I found my OG order spec sheet
6 strings
28 fret
-Mandolin Frets
33"
Hipshot A Bridge
-18mm
-Brass
-Black
-String through body
-GHOST MIDI Piezo w/system
Single cut
-Chambered upper horn
-Mahogany body
-Walnut Tone block
Neck Through
-5 piece equal sized Ash neck w/ 2 Wenge stripes
-Reenforced w/graphite or titanium
-Dual action truss rod
Kingwood fingerboard
-Mother of Pearl dot position markers.
-10" to 16" compound radius
Nordstrand Dual Coil pickups
-Finger board Radius matched Kingwood Pickup covers
-Carey@ Nordstrand said he could arch the coils so that stings sound at the same volume
-No exposed poles
Spalted maple top
-Black veneer between top and body
-Matching Head stock
Mike Pope pre
- Vol, Vol/Tone, Treble/Bass, Hi MId/Low Mid, w/active, coil, and stand by switches
Brass nut
-Width 52mm
Urethane finish
-Satin
Kingwood Playing ramp
-Finger board Radius matched
Dunlop strap locks flush mounted
Tummy Cut
Forearm Contour
Low B D-tuner
