Here is an excellent condition Mesa Subway Plus DI-Preamp. It's a great sounding, incredible tool for live performance and for home recording! $299 shipped CONUS, and it comes with the original Mesa box and owner's manual. Here's Mesa's description of the preamp's features:
Preamp Type: Solid-State Preamp derived from Subway D-800+
EQ / Dynamics Control: Variable High-Pass Filter (30Hz – 125Hz), Variable Voicing (Flat to Vintage Scoop), Fully Active 4-Band EQ (+/- 12dB of Bass, Low-Mid, High-Mid, Treble) with Sweepable (variable) Low-Mid (150Hz-1800Hz) & High-Mid (300Hz-5000Hz) Frequency Controls with Deep Switch (for enhanced low-end) & Bright Switch (for enhanced top-end).
Footswitchable Functions: Variable, Footswitchable Boost & Footswitchable Mute.
Output: Tuner Output, Balanced XLR Mic Level (DI) Out with Pre/Post & Ground Lift Switches, Line Level Preamp Outputs - Unbalanced & Balanced with Ground Lift Switch (drives any power amp), FX Loop Send (& Return).
AND ... It runs for up to 12 hours on a 9 volt battery!! (Or use a standard 9 volt power supply.)
I'll leave the "expertly-applied" velcro on the bottom. The feet are taller, so the velcro is out-of-play. If you remove the feet, the pre is pedal-board ready.
Here are some pics:
Preamp Type: Solid-State Preamp derived from Subway D-800+
EQ / Dynamics Control: Variable High-Pass Filter (30Hz – 125Hz), Variable Voicing (Flat to Vintage Scoop), Fully Active 4-Band EQ (+/- 12dB of Bass, Low-Mid, High-Mid, Treble) with Sweepable (variable) Low-Mid (150Hz-1800Hz) & High-Mid (300Hz-5000Hz) Frequency Controls with Deep Switch (for enhanced low-end) & Bright Switch (for enhanced top-end).
Footswitchable Functions: Variable, Footswitchable Boost & Footswitchable Mute.
Output: Tuner Output, Balanced XLR Mic Level (DI) Out with Pre/Post & Ground Lift Switches, Line Level Preamp Outputs - Unbalanced & Balanced with Ground Lift Switch (drives any power amp), FX Loop Send (& Return).
AND ... It runs for up to 12 hours on a 9 volt battery!! (Or use a standard 9 volt power supply.)
I'll leave the "expertly-applied" velcro on the bottom. The feet are taller, so the velcro is out-of-play. If you remove the feet, the pre is pedal-board ready.
Here are some pics: