Selling my pristine 2009 Peavey VB-3 all tube bass head. Comes with foot switch and AC cord. This unit is like new condition.
$1600 US or $1900 Canadian
The first 3 years of production of the Peavey VB-3's, power supply is universal, 240V (Europe) and 120V (USA), meaning you can use it anywhere in the world without having to change anything.
When first turning on the amp, the default startup is 240 volts. So the amp will try to start up looking for 240 volts. The amp will turn on and off repeatedly. Simply flip it off, wait 2 seconds and then switch on again and the amp will power up with 120volts. Peavey decided to remedy this power supply in the 4th year of release. But a part from Peavey will make the earlier models start up like the newer models. This never bothered me so I just left it.
Specs:
300 watts RMS into 8, 4 or 2 ohms
Total weight of just 37 lbs.
Matched octet of EL34 power tubes
3 x 12AX7 and 2 x 12AT7 preamp tubes
Internal rebiasing switch for using 6L6GC tubes
Universal switching power supply allows use worldwide
Dual channel: Volume/Overdrive/Low/Mid/Shift/High/Master
LED indicators for active Volume or Overdrive control (footswitchable)
Bright and Low Cut switches
Tube compressor w/level control, defeat switch and LED (footswitchable)
Constant-Q 9-band graphic EQ w/defeat switch and LED (footswitchable)
Master volume
Master Resonance and Presence controls for frequency-selective speaker damping
Effects Loop
Neutrik Speakon Combination Jack outputs
Balanced XLR output pre/post EQ
Preamp output and power amp input
Footswitchable mute for tuning on stage
Tuner output
LED-lighted Peavey logo with dimmer control
$1600 US or $1900 Canadian
The first 3 years of production of the Peavey VB-3's, power supply is universal, 240V (Europe) and 120V (USA), meaning you can use it anywhere in the world without having to change anything.
When first turning on the amp, the default startup is 240 volts. So the amp will try to start up looking for 240 volts. The amp will turn on and off repeatedly. Simply flip it off, wait 2 seconds and then switch on again and the amp will power up with 120volts. Peavey decided to remedy this power supply in the 4th year of release. But a part from Peavey will make the earlier models start up like the newer models. This never bothered me so I just left it.
Specs:
300 watts RMS into 8, 4 or 2 ohms
Total weight of just 37 lbs.
Matched octet of EL34 power tubes
3 x 12AX7 and 2 x 12AT7 preamp tubes
Internal rebiasing switch for using 6L6GC tubes
Universal switching power supply allows use worldwide
Dual channel: Volume/Overdrive/Low/Mid/Shift/High/Master
LED indicators for active Volume or Overdrive control (footswitchable)
Bright and Low Cut switches
Tube compressor w/level control, defeat switch and LED (footswitchable)
Constant-Q 9-band graphic EQ w/defeat switch and LED (footswitchable)
Master volume
Master Resonance and Presence controls for frequency-selective speaker damping
Effects Loop
Neutrik Speakon Combination Jack outputs
Balanced XLR output pre/post EQ
Preamp output and power amp input
Footswitchable mute for tuning on stage
Tuner output
LED-lighted Peavey logo with dimmer control
