Hey Y'all. I have a recently "renovated" Warmoth G5 bass. I had it film dipped by a film dip company that hydro dips everything from rims to out door ATV parts, to Bows (archery), etc. Anyway, the finish was getting a bit scratched and ratty, and I didn't want to completely sand it and refinish it, so I went a different route. I think it came out killer.
The only thing it needs is a new string string nut.
Here are the features.
Maple/Maple neck... standard (assym contour, steel rod, head adjust)
Hipshot ultra lite tuners
Swamp ash body (light) bass is under 9 lbs total)
Finish - Hydro dipped - kuiu verde camo, clear satin finish.
String through body with Warmoth bridge (brass i believe)
Nordstrand MM pickup in sweetspot - wired in series, but can rewire in parallel if wanted
1 tone 1 volume pot. .047 tone cap.
There are 2 other holes for additional pots/switches that have been plugged and finished over. These can easily be drilled out and a pre-amp can be added.
Trade bait
Any 5 string bass will be considered. I would also consider Markbass TTE 800 or 500 bass amp.
The only thing it needs is a new string string nut.
Here are the features.
Maple/Maple neck... standard (assym contour, steel rod, head adjust)
Hipshot ultra lite tuners
Swamp ash body (light) bass is under 9 lbs total)
Finish - Hydro dipped - kuiu verde camo, clear satin finish.
String through body with Warmoth bridge (brass i believe)
Nordstrand MM pickup in sweetspot - wired in series, but can rewire in parallel if wanted
1 tone 1 volume pot. .047 tone cap.
There are 2 other holes for additional pots/switches that have been plugged and finished over. These can easily be drilled out and a pre-amp can be added.
Trade bait
Any 5 string bass will be considered. I would also consider Markbass TTE 800 or 500 bass amp.
