Sold!
Welp, I've come to realize this is way more rig than I need right now, so to get the amount of rig I need, this must go. It's only been gigged a handful of times, and aside from one dent (which is shown in the third picture), it's in new shape. This sucker is loud, Loud, LOUD, with a clean sound and a nice EQ section. This is the B800 head with a 2x12 enclosure. There is also a tweeter, and it has its own power amp.
Here's the straight poop on this puppy, according to the manual (which you can download a .pdf of right here).
Discrete Class A input stages
Preamp DRIVE and master VOLUME controls
Six EQ controls: SUB BASS, BASS, LOW MID, MID, HIGH MID, and TREBLE
Active/Passive input gain switch with input CLIP indicator
Signal MUTE front panel switch or optional FS22 footswitch
EFFECT LOOP front panel bypass switch or optional FS22 footswitch
DIRECT OUT balanced XLR with independent LEVEL control, switchable "Pre-Post" and "Ground Lift", DC isolated
TUNER output jack independent of MUTE switch
Internal OPTO clip-activated power amp limiter with limiter-free normal operation
High current SPEAKON® connectors and steel 1/4” speaker jack
Metal shaft controls with threaded metal bushings mounted directly to front panel
All steel chassis
High density Baltic Birch plywood cabinet with Duratex polyurethane finish
Recessed casters and retractable steel handle for tilt-and-roll portability
12” Neodymium magnet cast aluminum frame woofers
Titanium diaphragm extended range HF driver
Dedicated 50w amp for HF driver with LEVEL control
Frequency Response: 20 Hz to 20kHz
Output Power: 8 ? THD < 1% 300w; 4 ? THD < 1% 500w; 2 ? THD < 1% 800w
8? High Frequency: 3kHz - 22kHz, 50w
Input Impedance: >200k?
Low Freq. Drivers: Two 12” Neodymium 8?/300w, total 4?/600w
High Freq. Driver: 1” Titanium 50w/8?
Dimensions: 16.75W x 18D x 30.25H
Weight: 69lbs.
Looking for $450.00 plus actual shipping. I'll probably have to stick to a money order on this one, because I only have a personal Paypal account. If you want to work around that, I am open to suggestions. Unless you have a Markbass Mini CMD 121P you want to swap for this plus some of my $$$, me no wanty trades.
Here's the dent; it's less than 1/4" in diamater.
Welp, I've come to realize this is way more rig than I need right now, so to get the amount of rig I need, this must go. It's only been gigged a handful of times, and aside from one dent (which is shown in the third picture), it's in new shape. This sucker is loud, Loud, LOUD, with a clean sound and a nice EQ section. This is the B800 head with a 2x12 enclosure. There is also a tweeter, and it has its own power amp.
Here's the straight poop on this puppy, according to the manual (which you can download a .pdf of right here).
Discrete Class A input stages
Preamp DRIVE and master VOLUME controls
Six EQ controls: SUB BASS, BASS, LOW MID, MID, HIGH MID, and TREBLE
Active/Passive input gain switch with input CLIP indicator
Signal MUTE front panel switch or optional FS22 footswitch
EFFECT LOOP front panel bypass switch or optional FS22 footswitch
DIRECT OUT balanced XLR with independent LEVEL control, switchable "Pre-Post" and "Ground Lift", DC isolated
TUNER output jack independent of MUTE switch
Internal OPTO clip-activated power amp limiter with limiter-free normal operation
High current SPEAKON® connectors and steel 1/4” speaker jack
Metal shaft controls with threaded metal bushings mounted directly to front panel
All steel chassis
High density Baltic Birch plywood cabinet with Duratex polyurethane finish
Recessed casters and retractable steel handle for tilt-and-roll portability
12” Neodymium magnet cast aluminum frame woofers
Titanium diaphragm extended range HF driver
Dedicated 50w amp for HF driver with LEVEL control
Frequency Response: 20 Hz to 20kHz
Output Power: 8 ? THD < 1% 300w; 4 ? THD < 1% 500w; 2 ? THD < 1% 800w
8? High Frequency: 3kHz - 22kHz, 50w
Input Impedance: >200k?
Low Freq. Drivers: Two 12” Neodymium 8?/300w, total 4?/600w
High Freq. Driver: 1” Titanium 50w/8?
Dimensions: 16.75W x 18D x 30.25H
Weight: 69lbs.
Looking for $450.00 plus actual shipping. I'll probably have to stick to a money order on this one, because I only have a personal Paypal account. If you want to work around that, I am open to suggestions. Unless you have a Markbass Mini CMD 121P you want to swap for this plus some of my $$$, me no wanty trades.
Here's the dent; it's less than 1/4" in diamater.