Nearly new Low Down Sound 15/6.5
Eminence 3015LF, paired with an 18Sound 6.5 controlled by a side mounted l-pad. The 3015LF will easily eat way more than the 450 watts it's rated for; I used it most often with an eden wt800B, bridging 100 watts into it. The lows are tight, and chest pounding. The 18Sound mid driver is crisp, clear, and efficient, and puts out all the top end you could ever need.
22.5" tall, 23.5" wide, 18" deep; 42lbs!!!!!
Lightweight, small, and easily capable of handling everything I've thrown at it, it's a single cab solution easily on par with an AE410 or 410UL; yet is smaller and lighter than both.
Done up nicely to look like a vintage ampeg cab with tolex covering, metal corners, and ampeg grill cloth, it's in as new condition with one exception...this thing moves so much air that I could hear the grill cloth flapping on the frame. It was stretched on quite tight, so improvement was not going to be found there. Don at LDS told me to run a bead of clear silicone around the grillcloth frame on the inside, which I did; but, despite the fact that I used clear, it is slightly visible.
Retail with the Ampeg-tart-up would be ~$650.
This one can be yours with no wait on the build time for $475+ actual shipping to your door, in the original packing.
It'll probably be two days before I can find time to post decent pics, but you can see and read about the cab here:
http://www.talkbass.com/forum/showpost.php?p=7586711&postcount=1
Eminence 3015LF, paired with an 18Sound 6.5 controlled by a side mounted l-pad. The 3015LF will easily eat way more than the 450 watts it's rated for; I used it most often with an eden wt800B, bridging 100 watts into it. The lows are tight, and chest pounding. The 18Sound mid driver is crisp, clear, and efficient, and puts out all the top end you could ever need.
22.5" tall, 23.5" wide, 18" deep; 42lbs!!!!!
Lightweight, small, and easily capable of handling everything I've thrown at it, it's a single cab solution easily on par with an AE410 or 410UL; yet is smaller and lighter than both.
Done up nicely to look like a vintage ampeg cab with tolex covering, metal corners, and ampeg grill cloth, it's in as new condition with one exception...this thing moves so much air that I could hear the grill cloth flapping on the frame. It was stretched on quite tight, so improvement was not going to be found there. Don at LDS told me to run a bead of clear silicone around the grillcloth frame on the inside, which I did; but, despite the fact that I used clear, it is slightly visible.
Retail with the Ampeg-tart-up would be ~$650.
This one can be yours with no wait on the build time for $475+ actual shipping to your door, in the original packing.
It'll probably be two days before I can find time to post decent pics, but you can see and read about the cab here:
http://www.talkbass.com/forum/showpost.php?p=7586711&postcount=1