Selling my Crown power amp, as I have no need for this kind of power anymore. Is in very good condition. There is a bend to right rear rack ear. Other than that is pretty much perfect.
Price is $250.00 shipped CONUS only
Specs
Output Power 1000W @ 2 Ohms Stereo (per Channel)
800W @ 4 Ohms Stereo (per Channel)
475W @ 8 Ohms Stereo (per Channel)
2000W @ 4 Ohms Bridged-Mono
1600W @ 8 Ohms Bridged-Mono
Damping Factor > 500
Input Sensitivity 1.4V
Input Impedance 20 kOhms (Balanced)
10 kOhms (Unbalanced)
Gain 32.9dB @ 1kHz, 8 Ohm Rated Output
Frequency Response +0/-1dB from 20Hz to 20kHz @ 1W into 4 Ohms
Signal-to-Noise Ratio 100dB
Total Harmonic Distortion (THD) 1% or Less
Input Connections 2 x 3-Pin XLR Female
1 x AC Power Connector
Output Connectors 2 x 3-Pin XLR Male Link/Out Connectors
2 x Neutrik Speakon NL4MP Connectors
2 x Binding Post Outputs (In Parallel with Speakon Connectors)
1 x Type B USB Connector for HiQnet
Controls Front Panel 1 x Power Switch
2 x Detented Rotary Level Controls
3 x Buttons for Select, Previous, and Next
Controls (Rear) None
Indicators Front Panel LCD Shows Speaker Presets
Front Panel LEDs for Power, Signal, Ready, Clip, and Temp
Cooling Proportional Speed Fan with Front-to-Rear Airflow
Power Consumption No More Than 30W at Idle
Power Requirements 100-120V, 220-240V, 50/60 Hz
Dimensions 19 x 3.5 x 12.25" (483 x 89 x 311mm)
Weight 18.5 lbs (8.4kg)
Specialties DSP Includes EQ, Crossover Filters, Delay, and Subharmonic Synthesizer
Protection for Short Circuits, Overloads, and Overheating
Price is $250.00 shipped CONUS only
Specs
Output Power 1000W @ 2 Ohms Stereo (per Channel)
800W @ 4 Ohms Stereo (per Channel)
475W @ 8 Ohms Stereo (per Channel)
2000W @ 4 Ohms Bridged-Mono
1600W @ 8 Ohms Bridged-Mono
Damping Factor > 500
Input Sensitivity 1.4V
Input Impedance 20 kOhms (Balanced)
10 kOhms (Unbalanced)
Gain 32.9dB @ 1kHz, 8 Ohm Rated Output
Frequency Response +0/-1dB from 20Hz to 20kHz @ 1W into 4 Ohms
Signal-to-Noise Ratio 100dB
Total Harmonic Distortion (THD) 1% or Less
Input Connections 2 x 3-Pin XLR Female
1 x AC Power Connector
Output Connectors 2 x 3-Pin XLR Male Link/Out Connectors
2 x Neutrik Speakon NL4MP Connectors
2 x Binding Post Outputs (In Parallel with Speakon Connectors)
1 x Type B USB Connector for HiQnet
Controls Front Panel 1 x Power Switch
2 x Detented Rotary Level Controls
3 x Buttons for Select, Previous, and Next
Controls (Rear) None
Indicators Front Panel LCD Shows Speaker Presets
Front Panel LEDs for Power, Signal, Ready, Clip, and Temp
Cooling Proportional Speed Fan with Front-to-Rear Airflow
Power Consumption No More Than 30W at Idle
Power Requirements 100-120V, 220-240V, 50/60 Hz
Dimensions 19 x 3.5 x 12.25" (483 x 89 x 311mm)
Weight 18.5 lbs (8.4kg)
Specialties DSP Includes EQ, Crossover Filters, Delay, and Subharmonic Synthesizer
Protection for Short Circuits, Overloads, and Overheating
