IMG_0312.jpg

For sale Fender MIM modded P Bass

Sold
$400.00
Strings
4
Status
This item has been sold and is no longer available!

Details

Hello everyone,

I'm selling my Fender MIM modded P bass.

$400 comes with a Fender gig bag.

The bass has been modified with the following components.

Product Description

The following prewired harness was installed. Purchased it from Bestbassgear.com.

Volume - Tone
Prewired with wire lengths for P Bass, using standard pickguard,
unless specified otherwise in checkout message

1 Pickup - 2 knob configuration

Contains:
- 1 Audio Taper 250K Pot (Noble)
- 1 Audio Taper 250K Pot (Noble) w/Capacitor (Sprague Orange Drop .047)
- 1 Standard Stereo Jack (Switchcraft)

The pickups are a set of Bartolini 8S P Bass Pickups.

Bartolini 8S

The 8S is the Fender Precision Bass® (P Bass® ) replacement pickup. They are highly respected by musicians and luthiers alike for their deep tone.

The two pickups in the P-Bass pair overlap each other by 3/4″ (19mm).

The “original series” bass pickups with passive designs. They are cast in epoxy to remove unwanted feedback and microphonic.

The stock bridge was changed to a Babicz full contact hardware black chrome bridge. The bridge is grounded. It has great sustain. The string action is lower because of the bridge and without the buzz. There are no dead spots. The knobs were replaced with black chrome knobs.

The bass is in good condition. There is a scratch on the butt of the bass that is shown in the picture. There is a little ding on the headstock, but not noticeable. The screws that hold the pick guard in place have a rustic appearance. The bass has some wear but not to the point of road worn wear and tear. The truss rod is intact and the neck is set nicely. A solid P bass.

It currently has a set of D’Addario Nylon Tapewound strings.

Paypal, CONUS shipped.
  • IMG_0312.jpg
    IMG_0312.jpg
    504.8 KB · Views: 195
  • IMG_0318.jpg
    IMG_0318.jpg
    268.5 KB · Views: 197
  • IMG_0310.jpg
    IMG_0310.jpg
    275.2 KB · Views: 173
  • IMG_0311.jpg
    IMG_0311.jpg
    314.1 KB · Views: 168
  • IMG_0315.jpg
    IMG_0315.jpg
    530.1 KB · Views: 166

Comments

Mar 31, 2006
2,441
459
73
Lakeland, Fl.
Can you provide a pic of the installation (solder job) on the potentiometers? Were there any additional holes made when the new bridge was installed?
 

Classified ad information

Posted by
Suncat
Feedback score
+55 /0 /-0
Category
For Sale: Bass Guitars
Views
934