Up for sale I have a beautiful Traynor YBA 100 I got here on TB last year for a project that never materialized.
This will include the original power tubes along with a set of TAD Red Base 6L6 GCM-STR power tubes.
Killer deal of $600 + $50 shipping CONUS, Venmo or f&f PayPal only.
From Traynor;
The YBA series signature is its versatility. The stock YBA100 ships with 4 hand-selected and tested 6L6 power tubes, delivering a classic smooth tube tone. For players looking for a more aggressive bass sound, the stock 6L6 tubes can be easily changed to any high quality EL34 tube set and be re-biased in the field, making the YBA100 essentially two amps in one chassis.
The all-tube Traynor YBA100 100-watt bass head has been designed to be the ultimate tube head for the working musician. LED indicators on the rear of the amp show proper tube function and status. In rare cases where a tube may fail, the YBA100 will lock out the problem tube and its partner, allowing the amp to finish the show on the remaining active tubes.
Smaller, portable and accessible, the YBA 100 is a lunch-box style amp, lighter than most 100 watt tube amps on the market. The YBA100 is the ideal amp for today’s bassist, providing the ideal amount of output for tighter stage plots.
Key Features
Three 12AX7 pre-amp tubes, a 12AU7 Driver and 4 6L6/EL34 power
output tubes.
3-Band tone controls with frequency selectable Mid control along with Deep, Bright, and
Resonance tone switches.
True balanced D.I./Line output. Selectable Pre-EQ or Post-EQ and Ground Lift.
Effects Send and Return jacks (Pre-Amp Out and Power Amp Input). These jacks
provide direct access to the Traynor all-tube bass amplifier’s signal chain so you may
slave out, or slave into, another amp; or you can use these jacks as an effects loop (for
professional-grade signal processing equipment).
Tuner Out jack.
Individual tube Bias Adjust, Indicator LEDs, and lockout so you will always know the
status of your tubes.
Specifications
Type All Tube Bass Head
Power at min. impedance (watts) YBA100: 100 at 4/8 ohms, switchable
Minimum Impedance (ohms) YBA100: 4
Burst Power – 2 cycle YBA100: 150 watts
Frequency Response (Hz +/-3dB) 30 – 16,000
Hum and Noise (dB) -90db
Input Channels 1
Channel 1 – inputs 2 x 1/4inch
Channel 1 – controls Gain
Master Volume Control Yes
Main Tone Controls
Treble, Mid, Frequency, Bass, Bright Switch, Deep Switch, Resonance Switch
Input Sensitivity (mV) 20
Master Outputs Pre-amp out (Pre Master)
Line Out (type / configuration) XLR Balanced (Pre/Post, Grnd Lift)
Line Out Sensitivity (Vrms) 1V
Effects Loop / Location Pre-amp out, Power Amp in, Loop Thru
Effects Return Sensitivity (Vrms) 1V
LED Indicators Power/Standby
External speaker output / location 2 x 1/4inch, 1 Speakon (Rear)
YBA100: Impedance Selector 4/8 ohms
YBA100: Tubes: 3x12AX7, 4x6L6
Tuner output 1/4inch
Dimensions (DWH, inches) YBA100: 8.5×8.5×8
Dimensions (DWH, cm) YBA100: 21.5x47x20
Weight (lbs / kg) YBA100: 22 / 10
This will include the original power tubes along with a set of TAD Red Base 6L6 GCM-STR power tubes.
Killer deal of $600 + $50 shipping CONUS, Venmo or f&f PayPal only.
From Traynor;
The YBA series signature is its versatility. The stock YBA100 ships with 4 hand-selected and tested 6L6 power tubes, delivering a classic smooth tube tone. For players looking for a more aggressive bass sound, the stock 6L6 tubes can be easily changed to any high quality EL34 tube set and be re-biased in the field, making the YBA100 essentially two amps in one chassis.
The all-tube Traynor YBA100 100-watt bass head has been designed to be the ultimate tube head for the working musician. LED indicators on the rear of the amp show proper tube function and status. In rare cases where a tube may fail, the YBA100 will lock out the problem tube and its partner, allowing the amp to finish the show on the remaining active tubes.
Smaller, portable and accessible, the YBA 100 is a lunch-box style amp, lighter than most 100 watt tube amps on the market. The YBA100 is the ideal amp for today’s bassist, providing the ideal amount of output for tighter stage plots.
Key Features
Three 12AX7 pre-amp tubes, a 12AU7 Driver and 4 6L6/EL34 power
output tubes.
3-Band tone controls with frequency selectable Mid control along with Deep, Bright, and
Resonance tone switches.
True balanced D.I./Line output. Selectable Pre-EQ or Post-EQ and Ground Lift.
Effects Send and Return jacks (Pre-Amp Out and Power Amp Input). These jacks
provide direct access to the Traynor all-tube bass amplifier’s signal chain so you may
slave out, or slave into, another amp; or you can use these jacks as an effects loop (for
professional-grade signal processing equipment).
Tuner Out jack.
Individual tube Bias Adjust, Indicator LEDs, and lockout so you will always know the
status of your tubes.
Specifications
Type All Tube Bass Head
Power at min. impedance (watts) YBA100: 100 at 4/8 ohms, switchable
Minimum Impedance (ohms) YBA100: 4
Burst Power – 2 cycle YBA100: 150 watts
Frequency Response (Hz +/-3dB) 30 – 16,000
Hum and Noise (dB) -90db
Input Channels 1
Channel 1 – inputs 2 x 1/4inch
Channel 1 – controls Gain
Master Volume Control Yes
Main Tone Controls
Treble, Mid, Frequency, Bass, Bright Switch, Deep Switch, Resonance Switch
Input Sensitivity (mV) 20
Master Outputs Pre-amp out (Pre Master)
Line Out (type / configuration) XLR Balanced (Pre/Post, Grnd Lift)
Line Out Sensitivity (Vrms) 1V
Effects Loop / Location Pre-amp out, Power Amp in, Loop Thru
Effects Return Sensitivity (Vrms) 1V
LED Indicators Power/Standby
External speaker output / location 2 x 1/4inch, 1 Speakon (Rear)
YBA100: Impedance Selector 4/8 ohms
YBA100: Tubes: 3x12AX7, 4x6L6
Tuner output 1/4inch
Dimensions (DWH, inches) YBA100: 8.5×8.5×8
Dimensions (DWH, cm) YBA100: 21.5x47x20
Weight (lbs / kg) YBA100: 22 / 10
